Getting Started

CV 11.25 commvault server could support Linux OS, want to download from “media kit” of cloud.commvault.com, what is different between enterprise kits, innovation kits and solution kits

Hi I was wondering how we disable Authentication for Agent InstallationIt shows as greyed out in commcell, I am aware this feature offers extra protection I would just like to disable it whilst we install multiple servers. 

Hi All, Refer below auto created by system with schedule backupis Index Server and must backup? refer auto created schedule Full backup and everyday, could change to weekly Full and daily Incremental? is require create second copy to DR disk? is require copy to tape? what impact if did not create second copy? Best regards 

Hi All, happy new year to all.  I see in severel commcells the following event: Programm: CvSolrCoordinatorEventcode: 19:2582Description: Number of available streams [1] is either less than the number of nodes [1] or less than the recommended minimum number [4]. This can impact performance of the backup. This comes during the backup of the index server. I cant understand the problem. I checked the streams on the SP lvl thats fine. I disabeld the schedule and suspended all running jobs so nothing runs started the index backup and the error comes directly. do you have an idear ?  

I installed Metallic Edge Monitor from our IT service center. I’m on an ARM2 macbook running 14.4.1 When I start up Edge Monitor, and go to the icon, it briefly, for a fraction of a section flashes a login, only to be replaced by “Activation in Progress” which never seems to change, even after hours!  Does anyone have any explanation for this?  How do you think I can fix this?  I can’t tell you the version of Edge Monitor, because the icon is unresponsive (except for Quit).

Good Morning, I have been asked to produce a report for a single subclient to show growth on our file server over time and the amount of data that is going into our archive. I’m a bit clueless how to do this, but I obviously know it is possible because I can see the data I want to report on. Any tips which report I should start editing so I don’t have to create everything from scratch? John

I have just added a Linux client to my CommCell, and there are folder paths that go way beyond 1024 characters. How can I back those up? 

Hey good day! to all here Techies,I am eager to know that do we have self-restore option for One-Drive in Commvault?Where Office 365 users can restore their files from One-Drive on their Own without having access to the Commvault console.I will be glad if anyone shares me a piece of document on this topic.

Hi, Some of my colleagues and I have noticed that as of recently, the ‘Expert’ section on https://documentation.commvault.com appears to no longer be available, as least not the way it used to be. The section does not appear in the navigation, regardless of whether viewing documentation for 11.32, 11,40, etc.;  The section can still be accessed by navigating to a specific URL (e.g.: https://documentation.commvault.com/2024e/expert/troubleshooting_restores_oracle_agent_01.html) though it will redirect to /commcell-console/ rather than /expert/. Her

I just started with Commvault and need to figure out my VMWare licensing.

I have been running backups for a week or so now, and just started reviewing the Job Histories. Looking at one of my clients, I can see that the Incremental is the same size as the Full was when it ran, which doesn’t make any sense?

After looking at the last few days’ worth of backups, I’ve noticed that one of the Incrementals converted to a Full backup. What are the reasons this would have happened?

I want to use GridStor technology, but I don’t want to use NFS or SMB. I am looking for a solution where I can share the mount path between two Media Agents (MA). If MA1 is offline, MA2 should still be able to perform backup and restoration. I have researched this and am considering deploying a Linux cluster with Pacemaker, Corosync, and OCFS2. My question is whether OCFS2 is supported by Commvault.

Hi team,  We have one storage pool with 50TB and want to deploy one Commserve with two media agents.  My question is what is the best practice to deploy the ddb over the 2MA?

Hi,We have configured a new Oracle RAC version 19c with two nodes. The Oracle Agent has been successfully installed, and the nodes were added to the CommCell console. Following this, the Oracle RAC was automatically created on the CommCell.However, when I attempted to configure the instance, the process was unsuccessful, and I encountered the following error:  Could you please assist me in resolving this issue? 

I want to know, about this topic, there is only support to rhel 7 and CentOS?I have MA with Oracle Linux 8; Shared SAN Data Server - System Requirements for Fibre Channel (commvault.com)

While you do have valid Commvault Credentials, you are not presently authorized for accessing Maintenance Advantage because no profile exists for the email address abc@xyz.com. Profiles in Maintenance Advantage must be created by authorized users from your organization.

Hi,For one of our customer we are setting up passive Commserve. During installation of failover instance 002 we are getting below error. please help me on same. 8000  6     02/17 15:48:36 ### ### ### - Initializing firewall standalone mode: bDaemonMode=True, nPort4=62201, nPort6=62204, szInstallConfigFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfigInstall.txt, szConfigFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfig.txt, szConfigLocalFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfigLocal.txt8000  6     02/17 15:48:36 ### ### ### - Firewall standalone mode is set8000  6     02/17 15:48:36 ### ### ### - Check firewall connection: bFirewallStarted=True, bCSTunnelUp=False8000  6     02/17 15:48:36 ### ### ### - Check firewall connection now.8000  6     02/17 15:48:36 ### ### ### - CS tunnel is up.8000  1     02/17 15:48:37 ### ### ### - Showing dialog : ConfigClientAuthenticationInfoViewModel

Hi,we are setting up new passive setup for one of our customer. during installation of failover instance we are getting below.8000  6     02/17 15:48:36 ### ### ### - Initializing firewall standalone mode: bDaemonMode=True, nPort4=62201, nPort6=62204, szInstallConfigFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfigInstall.txt, szConfigFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfig.txt, szConfigLocalFileName=D:\Program Files\Commvault\ContentStore2\Base\FwConfigLocal.txt8000  6     02/17 15:48:36 ### ### ### - Firewall standalone mode is set8000  6     02/17 15:48:36 ### ### ### - Check firewall connection: bFirewallStarted=True, bCSTunnelUp=False8000  6     02/17 15:48:36 ### ### ### - Check firewall connection now.8000  6     02/17 15:48:36 ### ### ### - CS tunnel is up.8000  1     02/17 15:48:37 ### ### ### - Showing dialog : ConfigClientAuthenticationInfoViewModel .......8000  1     02/17 15:48:38 ##

Hello. I am trying to register an AMI that was installed in AWS, but it appears like this with the CS name repeated 3 times and the name was entered only once../commvaultRegistration.sh --------------------------------- Instance001 ---------------------------------[ General ] Version = 11.32.65 Media Revision = 1191 CommServe/Gateway Host Name = xxxxxxxxxxx CommServe Client Name = xxxxxxxxx xxxxxxxxxx xxxxxxxxxxxx Home Directory = /opt/commvault/Base Log Directory = /var/log/commvault/Log_Files Core Directory = /opt/commvault Temp Directory = /opt/commvault/Base/Temp Platform Type = 6 Cvd Port Number = 8400  

Hi All,We are configuring GFS disk to disk to tape (different tape media). 1: first storage policy will configure daily Inc and weekly full for first disk keep 7 days 2: first disk daily Inc and weekly Full go to auxiliary copy of second disk keep 28 days3: second disk daily Inc auxiliary copy of daily tape media keep 28 days4: second disk weekly Full auxiliary copy of weekly tape media keep 28 days5: second disk Full (end of month) auxiliary copy of monthly tape media keep 12 monthsRefer another vendor GFS, if weekly full backup day same as monthly, backup execute monthly only. May we know Commvault could setup this? May we know Commvault must keep both weekly and monthly if same day?Best regards

Hello all,Would it be possible for Commvault to provide a script to enable CIS hardening for Windows 2019/2022?I see there is a virtual imagen of “CIS L1 Hardened Commserve 11.28 for WIndows 2019” at CommVault Store, but our customer is asking for a physical CommServe….I also see there are scripts for Windows 2016, but no scripts for windows 2019 or 2022.Please advise. Thanks in advance!Sergio

Hello, how can I download the entire essential and expert documentation in PDF without spending three hours selecting checkboxes in the navigation panel?

Hi All, Refer https://commvaultondemand.atlassian.net/wiki/spaces/ODLL/pages/1479215216/Aging+and+Pruning+Process “Idle space on storage not supporting the sparse file attribute can be reclaimed using the 'reclaim idle space' option from the DDB data verification job.” Windows 2022 with MediaAgent and local SSD for DDBCommvault 11.32.35 refer above version and setting, will it require execute “DDB Space Reclamation” job? we check system create schedule job “System Created DDB Space Reclamation schedule policy” Every date at 11AM and associations Deduplication Engines, but View Jobs display “No job history found”, why the job did not schedule execute? Best regards 

We have SSL error on Command center and Web Console. How to generate SSL certificate and apply it.