Hi there,I am trying to add a new cloud storage (S3 compatible), however I am unable to do so. Moreover, I don’t see any asociated log files. I only see this error message:“Failed to verify the device from MediaAgent [xxxxxx] with the error [Failed to check cloud server status, error = [[Cloud] The server failed to do the verification. Error = 44037]]. “ My question is: Which logs should I add to Logging setting? And how to troubleshoot this stuff in general? PS. As workaround I used this - https://documentation.commvault.com/commvault/v11/article?p=51230.htm but it didn’t help. Thanks for any ideas
Hi all,when I perform a restore from Commvault with a user configured as "sysbackup" I get a "logon denied" error: #******DATA RESTORE SCRIPT******#run {allocate channel ch1 type 'sbt_tape' connect user/33c75edba964cf91c4a814f4b013056c1f391bec0d266622e@CDB021_BCKPARMS="SBT_LIBRARY=/opt/commvault/Base/libobk.so, BLKSIZE=1048576 ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1)"TRACE 0;#******** READINESS REPORT *********# Agent Install Check:[OK] Database Check:[FAILED] Oracle reported the following error: ORA-01017: invalid username/password; logon denied. RMAN SBT Channel Check:[FAILED] [ORA-01017: invalid username/password; logon denied] RMAN Catalog Check:[OK] Destination Storage Check:[OK] I believe the problem is in the Rman script. In fact, in the restore Rman script there is no "as sysbackup" as in the backup script: CONFIGURE CONTROLFILE AUTOBACKUP ON;run {allocate channel ch1 type 'sbt_tape' connect 'user/33c75edba964cf91c4a814f4b013056c1f391bec0d266622e@CDB021_BCK as sysbackup'PA
Hello Community,I have many LTO that contain backups from another commcell (Commcell A). I want to add the jobs of these LTOs in the commserve database (Commcell B).So Commserve know the jobs and can restore in the Commcell B. Next, software encryption is enable on LTO Copy in Commcell A.Is it possible and how ? Thanks :)
I just want to ask a question regarding a SAP Hana log (point in time) restore.It’s an in place restore, from point in time selected.Does the entire DB need to be restored (as I’m seeing) prior to the logs being applied?Thanks so much.Mauro
Hello, guys.I currently have a client who is running on Redhat Linux Enterprise 8.3 and currently running agent 11sp17 and they seem not to be compatible. It keeps saying “nfs directory cannot be found”. What’s the latest version that can work with it? Or an alternative thing to be done to solve the problem.
Hello,I backup a VMware VM in Vcenter snapshot mode.When I go to client goups, I see that VM under the vCenterTherefore, When I try to add a new client for this VM to install SQL and FS IDA agents, I have this message :Do you know what is the best way to resolve this.Thanks !
I’m running 11.22.19 and have our CS and MA in UK on local time zone (GMT/BST) and a VSA proxy VM in New York on its local time zone (EST). Our backup plan’s schedules have “client time zone” set. However, the New York VM backups are starting at the same time as the UK, not what I’m expecting. The VSA proxy also has a file system backup configured and that runs at the expected local time.Which part of the chain is dictating the time zone for the proxy client?There is, on the properties sheet, an override time zone option which shows “time zone: not available”. I will try setting this to the New York time zone, however the time zone should really be picked up from the VSA proxy and this setting used to override that if required.
We suddenly encountered low throughput & high DDB Lookup (~99%) for all backup job.We have remove a obsolete Media Server this week. We also deleted some Storage Policy & Aux copy with no sub-client associated with. I would like to ask if anyone encountered similar situation? is our DeDup database corrupted? Please help. Many thanks
Hi, for some backup clients subclient activity is turned off for various reasons. After updating from 11.18 to FR 22 those jobs will be shown in the Job History as Failed Job. But it was no failure, is was a decision made by the administrator. Is there a way to suppress the display of those jobs? I did not find anything in the manual.Regards Martin
Hi allI have very large SQL DB on a client site. Due to it’s size the client is also a Media Agent that backs itself up and then replicates a second copy of the backup data to the secondary SQL node in the AG.What we’d like to do is use the Secondary node to backup the SQL AG DB from itself which would allow the primary node to not be accessed.From what I can see this is not possible. You can only run a backup copy/TLogs on the Secondary node. I just want to confirm there is no way to satisfy this client request?
hi guys, we have an issue with one of our Oracle VMs. The VM is not really big, the backup data is 1-2 gb in size (size of application). Compression rate is ~70%.96% of the time the backup is in read phase. The backup take around 30 minutes. The disk is really busy inside the VM. When the backup starts we see 20-30k read IOPS and 100% busy state, which I can’t explain. We can see it on full backups and on incremental backups of the default subclient.We already limited the read throughput with the RATE setting inside CV to 250MB/s. (before we saw 800-900 MB/s read). Anyway, this do not help with the high read IOPS at the start of the backup. We see this high IOPS for 30-60 seconds and then it falls to 500-1000 during the rest of the backup.Anything we can do to limit the READ IOPS in this case? What is the reason for such high read iops for this small database? What exactly is happening at the start of the rman backup? On the backend storage I can not see any bottleneck. We use All Flas
Hello, I am trying to install a file system agent in a Linux machine via answer file but after the installation is successfull, the client hostname on Commvault is the default of the machine and not the one i put on the xml. <clientEntity clientName='vm1"' hostName='vm1.bck.mngt.local"' /> I want it to appear with the domain .bck.mngt.local but instead appears with the machine default domain. Can anyone help?Thank you.
Hi, is there a way to upgrade/migrate from the Classic OneDrive and Sharepoint Implemenation to the new one in FR22? GreetingsFlorian
Hi all. Today we have a network setup where Commserve and MediaAgents resides on one network and clients on another.network seperated by a firewall. We use one-way direction connection, where clients opens the connection to the Commserve/MediaAgents. My questions is, wouldn't it be more secure to have a one-way direction connection from the CommServe/MediaAgents to the clients and not like we have it today. As I understands it, it was the standard way of doing the network settings in the “old” days. Regards-Anders
We do Intellisnap backups of some of our SQL databases. Once a week we do a integrity check on a snapshot also and it works fine.My question is what SQL versions can we use as proxies, does it have to be the exactly same SQL version or can it be a later version of SQL? I’ve not found that documented.BRHenke
What would the filter look like when I want to skip all or a certain local zone in a Solaris global?I want to seperate the global from the local and backup the local zones separately.Global is called S123, local zone are called sz34 and sz56.
Hi Team, Please let me what are the ports that we need to open for the backup process. In which direction we need to open the ports.Commvault to client Client to Commvault system
Hello,I'm new to CommVault, we are just starting getting it set up for production. We currently are running our backups on TSM but are preparing switching to CommVault. Is there a way to send completed log files directly to CommVault per pipe or other methods? That is how we do it with TSM. When a log file has been filled completely it gets piped directly into TSM. No waiting at all. The suggested method of placing the files into a separate archive with the postgres archive command doesn't appeal to us that much, it would nice to have the completed files go directly to a Log Backup instead of parking them, while you wait for CommVault to pull them.Any suggestion would be much appreciated!We are running on RedHat 7 with Postgres 10 and 12.Thanks!
I have commvault clients installed on the nodes in exadata cluster. Both the RAC clients and the FS clients for this cluster currently backup to commcell A.What do i need to do if i need to backup one RAC client to commcell A and one RAC client to commcell B?Will i have to install a second instance of commvault client on the exadata nodes first?Thanks
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
