Hi,I have been testing de VirtualizeMe function and I have a problem with a system with a “peculiar” disk design.This system has a LVM partition spanning over 6 disks (I know, right?) and I get an error at the format disk step.Anything in particular where this couldn’t work?
The process of setting retention to half what is actually required, combined with the periodic sealing of the DDB seems clunky, and results in significantly higher storage usage - can we expect any improvements to that process?Where an existing block is referenced during an operation, could it be more efficient to just extend the Object Lock retention for the associated S3 Object?
Hi All, Refer https://documentation.commvault.com/2023e/essential/planning_for_commserve_livesync_setup.html Identical software must be used for setting up the production and the standby CommServe hosts. Ensure that the Operating System and SQL Server version (including feature releases) are identical in the both the production and standby hosts. Could install and setup HA Active / Standby in one Windows 2022 Standard and one Windows 2022 Data Center? Best regards
hi guys, i decided, that i move my infrastrucutre backup from veeam to the commvault. i have around 125 VM on VMware cluster ( 5 esx nodes). i the veeam i have a one bakcup job, after sucessfull backup the data is copied to the secondary location and every sunday is full backup (synthetic full) copied to the tape (Quantum Scalar i3 with 2x LTO 8 drives). now i looking for a right way, how to migrate/move to the Commvault. I have already prepared a two physical servers, one is for the commcell and second is for media-agent (direct attached iSCSI 10 GbE 80 TB NTFS and 2x FC 8 GB to tape library. i wanna to some best-practice :) its enought to have one VSA proxy in vmware or is best-practice to have on every esx host the proxy ? from some years ago i know the commcell console, but now is only html5 console ? how to setup the tape jobs and backup copy ? - aux copy its possible to create some tape media pool ? its better to have a one backup job for all vm or separate it for app, app/
Are there any issues with creating a Secondary Copy for a Plan via the CommCell Console, with the intent of promoting that copy to Primary?For whatever reason, the Plan isn’t correctly listed within Command Center, and as such I am concerned about causing further issues if attempting the change via Command Center. Plans are terrible.
Hello, Quick question - Is Azure Kubernetes Service (AKS) licensed per VM just like normal on-prem Kubernetes? Could it also be licensed per TB?Thanks in advance! Sergio
Hello,We want to make Hardware Refresh for Media Agent.After install new Media Agent on new server with Windows Server 2019 Standard everything goes well. In CommServe MA is ready.After add LUNs from disk storage for bakups still everything goes well.But after add LUNs from other disk storage with VMFS datastores, MA goes offline in CommServe with offline reason:"The MediaAgent if offline is initialising and refreshing the device information"And this state cannot be repaired with:- reboot system and services- repair software- delete LUNs with VMFS datastores and after that all of aboveOnly after deleteed LUNs with VMFS datastores, full delete MA and new installation, MA gone ready.But if we again adding LUNs with VMFS datastores, MA goes offline again. (on that step we found where MA goes offline)Adding LUNs VMFS datastores with rules described:https://documentation.commvault.com/v11/expert/best_practices_for_virtual_server_agent_with_vmware.html- automount disable- LUNs present with R
Selective copy - Last Full backup Of the Month to be selected for Aux copyExample: for the month of march, scheduled Monthly Full backup is at March 31st 11:30PM, somehow if this backup get failed, as per below selective copy logic.. it will select the previous[March 23rd/24/25/26/27/28/29/30th ...etc] Full backup as Monthly backup.But actually, If the Full backup failed on 31st March… i need a logic for monthly backup as next/ subsequent Full backup to be taken as Monthly Backup [i.e ...April 1st/2nd/3rd …. Full backup]?How to get this logic?
Hello,One the SAP tenant database is giving this error message.Error Code: [18:146]Description: SAP HANA Error [hdbsql execution Failed. 447: backup could not be completed: [2111003] An error occurred while reading from the channel; $INFO$=connection broken; $PARAM$=erroneous channel (since 34mues) 16423 with request-id 491439191825439890 {0x00007fd7e91cc530: id=16423, channel={={={this=140565281966104, fd=INVALID, refCnt=1, local=x.x.x.x/58822_tcp, remote=x.x.x.x/30246_tcp, state=Closed, pending=[----]}}}} from 58822 to x.x.x.x:30246 [rx-stats: sb=0,ub=0,sc=1,uc=0][tx-stats: sb=745,ub=745,sc=1,uc=1][buf: I/0][flush: 1713430610825079][rdit: 169][ssl-epoch: 0] with method BackupMgr_ClientRequestIDX with id 491439191825439890 on host xx-xxxxx on port 30201 from process hdbnameserver with service port 30201, pid 34380 and tid 18566 started at 1713430610825041 SQLSTATE: HY000].Any suggestions please?
Hi all, Any idea how can I add/get the below tiles to the Dashboard? Health Report: Disk Library Growth TileHealth Report: Live Sync Status Tile https://documentation.commvault.com/2023e/essential/health_report_live_sync_status_tile.htmlhttps://documentation.commvault.com/2023e/essential/health_report_disk_library_growth_tile.html
Hello everyone,I am currently facing a problem:Backup for a large CIFS volume (> 50 TB! on NetApp) should run as follows:1. backup as incremental via SnapShot on productive filer several times a day2. transfer the SnapShots via snapvault to a backup NetApp via snapvault (aux copy)so far no problem ... then:3. backup of the last incremental SnapShot of the week from the backup Netapp to S3 (with DDB) and then synthetic full to get a new full again.-> This is possible in principle as the backup is incremental but a snapshot always contains everything. This means that only the diff of this last snapshot to the last synthetic full has to be backed up and this is only approx. 2 - 3 TB per week.4. once a quarter backup of the last (synthetic) full from S3 to tape (regulation) … no problem as well Unfortunately, Backup Copy ignores all incremental backups wif I use selection rules (even with “Apply selection rule for snap jobs” selected). I can either specify "all backups" here, but the
Good afternoon!Could you help me with the problem of restoring the exchange mailbox archiveError Code: https://[14:139Description: Browse failed during searching for results in the index.
Hello,We are running commvault 11.28.52 and currently testing the PostgtreSQL Agent. In our testing environment, we have two PostgreSQL 12 Servers running as a cluster with one Primary active server and one standby server. The servers are Linux-based VMs.We are performing backups and restores from the primary server. However, every time we restore the DB from the FSBasedBackupSet, the replication between the nodes stops working. What are the Best Practices for FsBased cluster restore and how to perform restore correctly from this backupset?
Hi Team,Recently we had multiple clients because of which license was over utilized to 130%. so, I disabled the clients for which backup isn’t required and now the license utilization is at 92% but I still see the below error.“The system is over the licensed capacity/usage. Data management jobs will not run.Please contact your software provider to purchase additional capacity/usage licenses.Click the link for details on how to address over-capacity or over-usage situations.”Could you please suggest if I need to worry because it says Data Management jobs will not run.
Hi team, I am trying to restore ACLs only for one of the folder from VMware backup. is that possible with VM backup. We have configured VM level backup for the server, dont have File system backup Please suggest
HI All, i just want to know the process how the data get reconstructed on the disk after the replacement. I’m aware the hyperscale uses Erasure coding in back end but not sure if we have any document defining the process.
How I configure Vmware VSA backup via NBD over backup network? normaly I need NIC pairing between client and MediaAgent to be sure the backup trafic is travelling over backup network, but in this case the ESXi server is delivering the data, how I can do here NIC pairing, as Commvault has only the vCenter server configured?Currently we use proxy server VMs with hot-add, but we want to reduce the VM foot print.We use Vmware and Windows MAs.Commvault version is v11.32.42regards Juergen
Hi All,I have a VM that is >2TB and we have observed both flakiness and slow performance completing backups, and in particular, restores.I have in the back of my mind the notion that CV recommends very big VMs be covered with FS agent (or intellisnap) rather than VSA but cannot find the relevant reference.The VSA best practice ref. does not cover this situation. Can anyone help refresh my memory?Thanks
Dear,Today I back up my environment with volume licenses, now I will use vm package licenses.With this I will change my backup mode from file system to virtual Server.QuestionWill my backup volume change?Is there any calculation to size the storage size of my backup in Virtual Server mode?
Hi Community,We have Data Domains as our primary storage for Commvault and tape for long term retention. We are looking to replace the tape libraries within the next year with DD Cloud Tier. With DDBoost now fully supported as access and client libraries does anyone know if and when DD Cloud Tier may be integrated and supported.
When executing what format are the client names?
Hello,We are running some pre-DR tests and workflows and I have come across an issue with VMWare VM restores (Windows) to Azure. Basically, the Azure agent does not get installed. The server can be reached through RDP, but other extensions that require the Azure agent, won’t work. I worked with Microsoft and they showed me how to install the agent, both online and offline. However, looking through the documentation, Converting to Azure Resource Manager (metallic.io), I see a mention of installing Hyper-V drivers for Linux, but nothing for Windows machines.Is this normal behavior?Thank you!
Hello, I tried to achieve incremental backup on object storage bucket s3.There is a lifecycle rules applied on this s3 bucket.The first full backup was achieved successfuly but incremental failed.It is seem to be due to lifecycle rules or not, if someone have explanation and how to fix these issue. Description: Backup failed for all files, job will not be marked as completed successfullySource: S3-***-prd, Process: CvCloudBkpi did not see anything in logs to confirm the reason why the incremental backup failed. Thanks for your help. Regards.Karim
Hi Team,i request you to help me with below error i observed during my 7 x Apollo server HSX installation in DC1 site. i downloaded the ISO from commvault site to my local system and transferred to DC2 windows jump server and successfully installed in DC2 site on 7 x HPE Apollo Servers .Later i transferred the ISO to DC1 jumb server and also have verified that all HW configurations in DC1 servers are as per HSX documentation, but when i start installation on HPE apollo servers, i get below error, please help !
Hi Team, I am trying to prepare a custom report in which i want to have a Dataset which should give the output in horizontal tabular format. below is the sample screenshot which should be in horizontal. Basically i want to have horizontal table for each group showing job history count in similar below format. In single report there wll be multiple table with different groups. We dont want to have input. Something similar to below query for example:Select ABC group from XYZ Commcell showing job history with “xyz” fields for last 1 month.
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
