Virtualization and Containers

Hi,Do we can able to backup of ESXi host? Or any recommendation also appreciated. Thanks,Mani

I have a customer who upgraded 4 of their Hyper-V hosts to new hardware (2 sockets per host).I installed the VSA on the 4 new hosts and released the licenses on the old hosts.2 of the hosts have not reported back to the Commserve indicating they’ve been released. I retired the clients, with no change.I restarted Commserve Services and ran a Data Aging Job.The license summary report is still reporting over use.

Hi all. I have a question about Virtualize Me - Vmware. I have a physical server, which I want to make a clone of, to our Vmware environment. I do not want the cloned server to be connected to the network in anyway as its a DC server. So my question is, when the Virtualize Me process is running, will the server at any point be connected to the network for the restore process to work or is all done “offline”? Thanks-Anders

Hi,i have a question about the implementation of some VSA proxy in hotadd mode only on vmware VSAN.it is really needed to open network port 902 between VSA proxy and ESX host ? can we only open port 902 between Vcenter / media agent /vsa ?in my undestanding the port 902 is only use in NBD/NBDSSL mode as a fallback mode when other transport mode are not available.regards,Christophe

Hello, We want to enable self user restores in our company. We are wondering how other Commvault customers have implemented this and what were the challenges. Are you using Command Center or api’s? How are you letting users to restore VM backups? It would be really helpfull to hear your suggestions. We are currently looking at Command center and API options.Thank you! 

Hi,i have used the article to convert VSA/MA as FREL for vmware. in the documentation i don’t understand the need of creating a XFS mount for the FBR cache folder.there is a difference on the performance when the FBR cache is in ext4 instead of XFS ?regards,

Hi Just like a ‘Plan’ can be created as a base plan and additional plans ‘derived’ from the base plan….Does/ will  such a concept exist for VM Groups The idea ofHaving a ‘base’ VM Group creating multiple derivative VM groups, with partial optional overrides   then having the derivative VM groups ‘update’ when the base group is updatedThis would be incredibly usefulPS: There are mechanisms to come up with a ‘coded’ solution to this (and there is a subclient cloning process), but having a solution within the Admin Center would be ideal       

Hi all, we have the situation that we must backup hyper- cluster enviroment and some vms have vhds disks attached.  As we know vms with vhds disks attached are not allowed to backup.  We create 2 Subclients: 1 → Manually selection of all vms with vhdx discs only2 → Manaully selection of vms with system disc ( vhdx ) and exclude of vhds discs Now we have the problem that new created vms are not backup automaticcly. When we create an 3 subclient with the content of all unproteced vms it could be that new created vms with vhds are backuped and we went into trouble.  My 2 Questions: 1 do you know any filter possibility for rthe vhds disks ?2 Is it possible to create an report for this cluster that reports all vms wich are not backuped or included in the 2 subclients ?  regards Sebastian

Hi,We get an error when backing up vm with more than 5 disks in OVirt. Error;Error Code: [91:271]Description: Unable to attach disks for virtual machine [<vm_name>] to the proxy. []Source: <proxy>, Process: vsbkpVM has 14 disks.I attached log file.Virtual machine’s disk type is virtio-scsi and proxy machine disk type is virtio-scsi too. Commvault v11.20.27oVirt 4.3.6Proxy server OS RHEL 7.7Virtual Machine OS RHEL 7.7 How can i solve this error? Any limitation here?

Hi, We have 2 Windows Commvault Servers.Previously, none of them could do a LiveBrowse for Windows VMs during a Guest Files and Folders restore task. After we put Commvault exclusion on our anti-virus (SentinelOne), and turned off Firewalls on them, the LiveBrowse is now working on Windows Commvault Server No.1, but still not working on the Windows Commvault Server No.2 which always fails with LiveBrowse error code -6, failed to initialize VM disks. The 2 Servers are very similar except thatThe No. 1 uses local disks as disk library, whereas No. 1 uses a NAS as disk library. The No. 1 Commvault is 11.20, whereas No. 2 Commvault version is 11.14Just to see if the NAS is the issue for No. 2, I’ve setup a local drive as disk library for a test backup, followed by a LiveBrowse restore, but failed again with the same error message. I’ve logged a case with Commvault support, but the engineer couldn’t figure out why either so he has decided to escalate the case, however, I was told to upgrade

Hi Team,  I want run the backup only once in a week, my CVLT version is 11.21.20 there o option to  schedule the backup on weekly basis due to no availability of “ Run incr backup before sytheticfull option” can some suggest how can schedule weekly backups without daily incremental.

Hi.I am new to commvault and i deployed cloud control (all in one) in Azure. After initial settings, when i navigate to protect section, i couldn't find application section at all. In the guided setup page, i could see cloudapps with tick enabled, but when i click it. Its not navigating me to cloudapps section. Is this a bug or am i missing anything here?Cloud control version : 11.22.0

Hello,customer changed IP adresses of some ESXi hosts. Now the software claims that 14 of 12 socket licneses are used. Looking in the license summary report we can see three hosts with the old and the new IP address. Is there a way to clean this up? Or do we need to wait for a full backup for each and every VM?RegardsMario

Recently updated credentials password and now getting intermittent backup job failures.  Failure reason: error code 91:139 Unable to connect to virtual machine host. Cannot complete login due to an incorrect user name or password.] Source: sdcvcsa01, Process: vsdiscovery ; I have verified the AD password and validated it again across the virtual machine credentials. Also, verified that m y AD password is not changing or account being locked out anywhere else.

Hello Everyone, Newbie alert.Please correct me if I understand this right. Subclients enabled with Intellisnap backups using NetApp array integration will go like this - A job will be triggered and a VMware and NetApp snapshot will be taken and the snap backup job will finish. Then the backup copy operation will trigger which will mount the datastore to the proxy VM through the proxy ESXI (we have NFS datastores and our proxies are running as VMs). The VMDKs will be copied to the library through this operation and it will finish. Now we have installed a new NetApp array and the team is continuously relocating the VMs to the new datastores round the clock. Now our snapbackups are completing but when we are triggering the backup copy operation, that is failing with “Unknown VMInfo error ”. After marking the Job as do not copy and running the snap backup again, we are able to successfully complete the backup copy.  What would be the best approach to make sure that our backup copy operatio

HiBeen plagued with this problem for a while. Support has not been able to crack it yet either. I have 4 Media Agents and 2 are using CBT and crash consistent backup options for the Intellisnap and work fine. The other 2 Media agents are also using CBT but using Application Consistent (quiesced backup) backup options for Intellisnap and these Media Agents will sometimes freeze up the Virtual Disk Service and the backupcopy fails for the remainder of the backup copies. I cannot open the process manager on the MA’s when this happens and end up have to reboot the MA to get things back on track. Not a lot of info but chucking this one out there to see if anyone had a similar experience. 

Hi Everyone,Is there a way to set maximum concurrent restores per replication group/VSA proxy for LiveSync for VMware? Running re-sync of all VMs at the same can be problematic.Thanks!

Hi,has anyone implemented vm backups in rhev-m virtualized environment ? Thanks

I've had multiple instances of duplicate client computers showing in the Comcell Console when using an In-Guest agent and then later including the VM for backup. Whilst I know (and have successfully) merged clients to remove the duplicates i would like to understand  how Commvault decides when a discovered VM is the same as a client that is already discovered/configured for backup in a different way (ie with an installed agent in the guest).Thanks in advance. 

We recently noticed that during our Domain Controller / Active Directory agent installed during the backup we get a scom alert that says “AD Replication Monitoring : The following DCs have clocks which are set in the future.  This can cause replication errors in Active Directory and prevents the 'AD Replication Monitoring' script from detecting replication errors. It happens on our primary Domain Controller and it affects our other two servers. I have the VSA backing up the VM and a separate schedule that backs up the AD portion. I don’t see any alerts or failures in the job history, any thoughts?If I remove the primary NTP / AD server from the backup schedule the error is not generated so I’m thinking maybe contention / overlap with the VSA and AD client? 

Which port need to open among CS, MA and VSAProxy to take Openstack Backup. I want to take FileSystem /DB or VM backup from Openstack Environment.

Hi all!Based on documentation (11.22) there should be an option for P2V (Virtualize Me) in Command Center:https://documentation.commvault.com/11.22/essential/98093_performing_virtualize_me_for_windows_or_unix_computers.html There is no such thing in my case:What am I missing?Version: 11.22.9. Thanks! 

I need to know the snapshot size from all my vmware clients across all backupsets and subclients in a single report. I will analyze how many free space I need on vmware datastores while backup is running.I see the info on job details, but it would be easier if I have an own report for that in a single view.I tried the powershell module with Get-CVJobDetails, but in the output the snapshot size is missing.Any idea?

Hello!I’m new on this community, but I’m a CommVault user since 2015. Glad to be here and nice to meet you all!Today I had to urgently (as usual) restore 2 VMs, then I got an email from VMware team saying: “Hey, you missed to write custom attributes on the restored VMs!”Looking at the VMs I noticed that they were right and VMware Custom Attributes were empty. We have +1500 VMs and we use them to keep a log of who installed it, when, which app is running on etc etc.So finally my question is: is there a way to include certain VMware custom attributes in the VSA subclient? And of course restore together with the VM? I don’t want to include all, only the ones I care of.Thanks in advance Stefano 

I have configured an app-aware  (SQL) VM backup and the initial job ran successfully and pushed out the required agent to the VM and subsequently backed up the SQL instance however the schedules initially assigned to VM look to have been applied to SQL subclient which causes the job to fail on next run and every run thereafter as the application is trying to be backed up both as an app-aware VM but also a standalone SQL backup.Has anyone else had this issue with SQL app-aware backups?