Solved

we plan to migrate Netapp OnTap from on-premises to cloud, want to get some suggestion. 1, plan to backup data to Azure data box, then restore data from data box to Azure file service. How to move backup image from Azure data box to Azure blob for next restore job? 2, on-premises Netapp OnTap is about 10TB, will move them to Azure file service and run routine backup job. How to charge license for the migration and routine backup job? 3, After we restore data from Azure data box for Azure file service, how to sync. data between on-premise Netapp ontap and Azure file service? 4, how to backup Azure file service? mount CIFS on backup agent?

Hello All, Yesterday with one of my colleague we tried to configure some Reports from daily backup on email. The fastest way is login to webconsole. My colleague has some access to CommCell, but from site of webconsole, when he tried to login, the popup window inform us that the user or password is not corrected. I wonder what type of security access should be granted to the user to: Have access to webconsole.  Have possibility to create proper report.Regards, Michal 

Hello,we use an “Fujitsu Eternus LT S2 10” with our commserve and till we change the StorrageLibrary it works good. But now we get this Message and I doesn’t find the right setting to activate the tape-Library.  We use  11.25.23Can you help me ? best regardsChris

Hello to all,In case of local Disk Library with Commvault DDB enabled, If create a replication/secondary job to a HPE StoreOnce as target, these jobs are going to transfer only the changed data blocks ? Like Dash copy? Or the entire physically copying data for every job?The goal is to reduce the data / traffic for replicated jobs.Please for your help 😀 Thank you in advance,Nikos

A customer would like to use  direct attached (SAS) LTO drive. Ist it possible ? I didn’t find how to configure it.Thank youJiri.

Hello Team, I have a client who is requesting to Backup Gsuite mailboxes and also restore the mailboxes to her exchange on-prem.Please, I will like to ask if it is possible with Commvault.  Thanks.

Hello - We have a bunch of DEV servers that the developers turn on and off without letting us know. We would like to setup either a prescan or prebackup process that would check to see if the server is active, either by a network check or seeing if its powered on  - and if its not, skip the backup. Anyone tried this?  thanksPaul

Hi,  Does anyone knows how the Commvault determines the number of clients and instances to be crosschecked? According to Data Aging logs, the function getCrossCheckInfo() returned a total of 10 (ten) Oracle instances to be cross checked, but we have many more.  The option Disable RMAN Crosscheck is NOT checked for any client.   

We’re a Service Provider and want to automate reoccurring tasks using Python, so we can integrate these in our business processes. (examples: creating new schedule policy, creating new storage pool, create scheduled report)As I’m new to Python it would be really handy to have some way of converting a Commvault action to a finished Python script/command, similar to how you can see certain API equivalents or save certain actions as a script from within the Java Console.Is that possible or some other way to get the Python command equivalent without having to manually put it together?I’m aware of the info on the documentation online and GitHub, but it would be great to have more examples than the ones on the documentation site so they can be used as a guideline for non-Python pros. For example for each option a quick example, as it is done with the qcommands.

Hello Folks,I have to perform these three steps via WF but I can't find any guide that I can help myself.Anyone have experience?Backup of Server AMI (AWS)ThenBackup FS via Media AgentThenSQL Backup FULL / Differential OnlineBest regards,xor

Hello, Team. So, I have this question. Is it possible to Archive tables for SQL server databases in Availability Group with commvault? Please, advise as this is urgent.

hi, we have on AUX copy with WORM definition, now we want to delete those jobscan someone help?

Hello everyone, how are you guys doing?Well, currently we have a client that is using Commvault software and he is kinda lost in the alerts that he receives via e-mail (even having the configurations of the Tokens in the Alert when he receives, the pieces of information is not properly shown as he expects like the correct name of the VMs, why some of them are getting errors and which VMs, etc).With this, he requests to see if there’s an option to receive the Alerts integrating with Zabbix or with something similar. I took a look in the Alerts Configurations and I see the option to use SNMP and Webhooks. Here we already have a Zabbix server that we use to receive some specific Alerts such as if the server is down, or rebooted. With this, I took a look in the documentation and noticed that Commvault can use SNMPv3: https://documentation.commvault.com/v11/essential/97609_setting_up_snmpv3_alert_notifications.html but I didn’t found anything in how to properly configure this so we can use

from no reason Commvault training to backup passive node instead of primary..

Hi  All,After installing a new library (NAS with CIFS share) with new storage policy (no compression , no encryption) –Backup jobs are running fine, but aux copy jobs (replication to the DR site) are much slower than before , about x10 times slower.We checked the network performance between MA and repository and between MA production and MA DR site – all working well.What can be the problem? Is there any fine tuning for the aux copy wo work faster?Thanks.

Hi All,i want to configure 3rd party storage replication between 2 Commvault sites (every site has a Media Agent) , instead of using a dash/aux copy.is this supported? What is the way for restoring from DR site when doing a failover after a crisis? Can we just scan the CIFS share on the DR media agent and restore all data?thanks.

Hi,we want to backup some vmware vms sitting at a hosters site.For security reasons, the vcenter is in a different network segment and only available via an exclusive vpn connection.So i wanted to setup a Pre-Scan script to up and a Post-Backup script to down the VPN.But for whatever reason, the vmware VSA agent isn’t supporting a Pre-Scan script.Am I the only one, looking for this feature/function?Is there a workaround?I would really like to not have to use another program to schedule the VPN. Best RegardsJoerg

I have deployed FileSystem Package to approx. 80 laptops remotely from console and did not selected option to “configure as laptop “.Now, they are appearing as Server and i want them to appear as laptop.How can i change the package to configure as laptop?when i try to add package . the option to “configure as laptop “ does not appear”. 

Hello,I have found ntfs disk errors ot commvault disk library.The library was offline. I have performed check disk on the volume and errors have been fixed.How to check health and data integrity  of the backup files and directoriesThank you!

Hello,is it possible/supported to restore sharepoint online list column? thank you

Hi guys,  Recently, we upgraded our CommCell environment, from one of the clients, the upgrade passed successfully, on the CommCell console, the new version is showed up, but on the client side, when checking the commvault services status, we found out that it’s the old version that is still showed up comparing to the other clients. We tried restarting services, but, the issue remained.Any suggestion to clear this issue ? Is there some sort of cache on the clients to be cleared, or anything else ? Regards.

All my media agents have the same settings in Media Agent → Properties → “General” Tab except one, which has ”Validation on Network” not checked (the others do). I found the docs for this setting here:  MediaAgent - Online Help (commvault.com) and its one of those where the definition is basically rewording the setting (not a lot of detail)Is there any reason anyone would *not* want to check “Validation on Network”?  I’m not sure if it was an oversight or done for some reason for this one media agent. I’m mostly sure it was oversight or forgotten about, but wanted to see if “Validation on Network” was something set by default (I’m on SP16), or if people turn it off as its CPU intensive or mostly unnecessary unless you need xyz protection from bad/choppy network connections.  I would guess that if “Validation on Network” is unchecked… something else would catch invalid data before its written to disk?

Hi, I have issue after upgrade Commserve and MediaAgent. On the customer environment has Commserve and 2 MediaAgent, I have upgrade Commserve to SP24 and 2 MediaAgent to SP24. The result Commserve is complete upgrade fine and 1 MedaiAgent is complete upgrade fine. The second MediaAgent is display that can’t communicate with commserve need to change commserve name.I have check on Commcell the second MediaAgent go offline and check readiness, it shows about communicate. So I try to check network ping , telnet , and check on hostfile. CS can ping <ip> and <hostname> to second MediaAgent, MediaAgent can ping <ip> and <hostname> to CS. CS = OKMA1 = OKMA2 = need commserve to change name Is anyone has meet about this issue? Please advise me. Thank you.

Good morning to all.On a monthly basis I release auxiliary copies to tape ending with a total of 11 tapes.I wanted to do a restore of about 675MB and it asked me for 9 tapes to do it, is this so why the data has been distributed on 9 tapes?Shouldn't it be on one tape only? Since the size of the L7 tape is large.  Could it be due to the "Use Scalable Resource Allocation" option? Thank you very much for your help.Best regards,Johana 😀

Good morning allI wanted to confirm that initiating a restore using Command Centre won’t give you the option to change the Data Path (Media Agent and Library)?We’re allowing business units to manage their own operations and this is one requirement that’s come up, and it looks like we will have to get them to use the Java console instead? Thanks.Mauro