Solved

Hello Team,  Just thought to discuss with everyone, we have lots of medias thats turn into "Deprecated” moved to Retire Pool which are very less usage. When am looked the information in Media Properties shows below message,   When I could see Side information, shows ver less usage info : As per the default CommVault Media Hardware Maintenance shows as below,  Here my question is : Whether those medias mark as good and re-use for future its advisible? Can you someone clarifity from MM. @Christian Kubik 

Does anybody have any suggestions on how to backup a server without application data that would allow a restore of the base server which can then have the application data restored separately?Previously used backup product had a selection item called “BMR” that could be used to backup the base server allowing Bare Metal Recovery. If it makes any difference the server is a virtual machine.

I’m deploying a 2 node grid pair (local storage shared using dataserver IP), these servers also have the virtual server agent deployed and are both defined in the pseudo client.When I take node 1 offline (which is the top node in the VSA Proxy order)  simulate a failure the VSA backups go to a waiting state with “14:201” Index from previous job was not found on MediaAgent, When I take node 2 offline the MediaAgent resources failover as you’d expectThe current VMware pseudo client is V1 indexing, if I create a new pseudo client and upgrade it to V2 indexing will this resolve the issue and allow jobs to continue to run if the primary VSA proxy/MediaAgent is offline?Also, I know that you need to disable the existing pseudo client, create a new one, run the workflows to update / import configs, but can I get away with just creating a new pseudo client and running the upgrade to v2 workflow (i’ll happily re-create the configuration) and leaving the old pseudo client running the legacy envir

That’s it.  I see that I’m at the limit of indexed items for a single node, and our indexed material continues to grow.  Email in this case, but my file indexer will be full on it’s first node within the next few months.How do I add another node?

I have seen slow performance degradation in my Exchange backups. What can I do to improve speeds?

Hi, how can I check if my backups/subclients are up to speed with retention ? If I have reached the established retention and the data is starting to expire ?Days and cycles that a client lacks to meet the policyThanks 

We do automatic rollouts of Active Directory in Azure for our Customers with Ansible.We want to install the AD iData Agent with the Unattend Package and Custom “install.xml” File.These we are already doing successful for MA, Proxy and Restore Agent.If you do Unattend AD Installation in the XML is PW for AD Agent needed. But it is expected a hash, but i cannot find what hash (for the PW) the Installer expect. Normal PW is not working and sha-256 hash of PW is not working, too.This is the line in XML:<activeDirectory>               <userAccount password="3820c5c6992b6774aced93ecd88e04e35b4398d99e3f0a7d8"          domainName="q1xyz.local" userName="svc-adbackup" /></activeDirectory>So it would be important to know with what the setup when you create the package the PW encryptes, because during automatic rollout we get it from our central key Vault during installation. 

Dear all, we currently see the ORA-01031 “Insufficient privileges” error in the Oracle alertlog when running an intellisnap backup of a RAC database. The comands to run are alter database begin backupALTER DATABASE BACKUP CONTROLFILE TO '+DGDATA/backup.ctl.galaxy’ REUSEalter database end backup Each command results in an ORA-01031. User used to backup has SYSBACKUP privileges. Any ideas to solve this issue are welcome! Thanks,Christoph

Hello, Is there any detailed documentation on how to put antivirus exclusion for commvault 11.22.13 for :We use Symantec endpoint protectionCommservesMedia agent on WindowsMedia agent on Linux 

Hi,Do we can able to backup of ESXi host? Or any recommendation also appreciated. Thanks,Mani

Our security team enabled some more login and found the below request. I think it’s a legit request from our commcell, but I’m not able to find any logfiles where I can see the requests.Does anyone know in what log file I can look for them? //Henke

We have some trouble with paths to a Synology nas going offline.Currently we have the DNS name in the path. I’d like to change that to referring the IP address instead. I’m pretty sure I can do it without any issues but better safe then sorry. Anyone see any risks of changing the \\DNSname to \\IPaddress for the path(s)? //Henke 

Hi,We have a little discussion going on if transaction log backups are non-dedup by default despite the StoragePolicyCopy has deduplication enabled.Or do we need to configure a non dedup storage policy for this?In my believe a Log Storage Policy is there for other retention times and copies. The backup type decides if the data must be dedupped or not.Can someone clarify for me?Kind regards,Danny

Running v11SP20.40.  We’re having a ton of occurrences in the last 3 weeks of this error across multiple environments:[The SDT data transfer was terminated on a request from the Job Manager.]I work in a MSP environment with the CS in one datacenter and the MAs spread out around the country.  We have a minimum of 10GB on our datacenter links from MA-MA and MA-CS.  I’m curious if anyone has seen this and has any resolution or troubleshooting steps.Thanks!

Hi community.I have the follow problem to try to restore a sap hana database out place. SAP HANA Error [hdbsql execution Failed.448: recovery could not be completed: [3020067] Buffer does not provide complete page.; $EndPos$=0x00007f60c9932000; $ReadPos$=0x00007f60c9913000; $PageSize$=262144, [110507] Backint exited with exit code 1 instead of 0. console output: No additional Information was received SQLSTATE: HY000]. 219989 35b55 03/27 18:25:10 41123561 ::restoreFile() - READ ERROR encountered by the Data Mover.219989 35b55 03/27 18:25:10 41123561 ::restoreFile() -#ERROR /usr/sap/H4P/SYS/global/hdb/backint/DB_H4P/41088714_COMPLETE_DATA_BACKUP_databackup_2_1219989 35b55 03/27 18:25:10 41123561 ::performRestore() - Failed to Restore the file=/usr/sap/H4P/SYS/global/hdb/backint/DB_H4P/41088714_COMPLETE_DATA_BACKUP_databackup_2_1 retCode=2 errno=0219989 35b55 03/27 18:25:10 41123561 ::performRestore() -#ERROR /usr/sap/H4P/SYS/global/hdb/backint/DB_H4P/41088714_COMPLETE_DATA_BACKUP_databac

Can we use the Shared disk to create the DDB on Linux machines 

Hi guys,  I'm having a customer who is actually using Standard MA with Commvault to back up to copy 1 to disk (PureFlash with NVMe Drives), copy 2 (and other PureFlash) and a copy 3 to Tape around 350 TB per week to send to tapes (LTO7) 4 tape drives (weekly Full) at a sustain throughput of 700 GB/Hour per drive (4 drive in parallel). We are looking to replace both MA with two HyperScaleX clusters.  The questions are ! How we need to configure the HyperScaleX (reference architecture) to sustain the weekly tape creation of 350 TB per week with the same throughput knowing that we are going to use NearLine SAS in the HyperscaleX Cluster !  Or ca we use SSD for the Storage Pool drive in a HyperScaleX. 

I got during the last full backup the following message:“Index cache [D:\IndexCache] free space on MediaAgent [host name] is [51197] MB. It is considered critically low. Backups will start failing if the cache runs out of space. Take one of the following actions: 1. Increase the index cache total disk space. 2. Reduce the retention setting on the index cache.”Question:How can I reduce the index cache size? 

Hi All. I need a help on commvault backup. Can someone list me few differences between using commvault backup and azure backup? Why do we need to select commvault backup over azure provided backup for azure environment.

Hello all,I ran into a bit of an issue… Yesterday, one of the Disk Libraries got filled up and the backups went into waiting status. After haveing a look at the utilization, indeed it turned out to be 99,7% full.The main culprit were SQL server backups: There were some backup jobs with an extended retention - so I’ve deleted those, and some more of the old backup jobs to make space. I also ran Data Aging and could clearly see data chunks being deleted in SIDBPhysicalDeletes.log and after a while I got this:  So, I assume quite a bit of data was deleted. The Primary copy (blue) went from 52.95TB down to 19.81 TB. However, when I check the Free Space on the Library I got very little: So I checked the Mountpaths Space Usage for that DL: Data Written corresponds to amount of space used by the Primary copy: 19.8 TBHowever Size on Disk, which takes into account Data Written + aged jobs which are still referenced by valid jobs is still very high. Almost unchanged. I am quite confused by this.

Commvault V11 If you have installed Commvault hardware VSS provider and Netapp Ontap Provider at the same time, which Hardware VSS provider will Commvault use by default in an Intellisnap enabled backup?Any answer to the question is appreciated.

 Hello,I have a situation where the option to enable block level backup on subclient is missing. It’s not grayed out, but it’s not available there. The missing option is from MS cluster virtual client (pseudo client). The config meets requirements, nodes are on win2012 r2 and mediagent is installed on both nodes. Here are the cluster subclient:here’s some random subclient without mediagent package installed As for the doc, blb is supported at ms clusters https://documentation.commvault.com/commvault/v11/article?p=18527.htmhttps://documentation.commvault.com/commvault/v11/article?p=3505.htm

Coomvault version 11.22.13So we are still working on the evaluation license and hopefully will get the active license today.. Not sure if this has anything to do with it..But Im wondering why my commserve server which also falls under the clients has the “File System” greyed out.  I think we want to get a backup of the C: drive and system state for our commvault commserve server.. right?I looked under the properties for the client server and see that under Activity Control the ENABLE BACKUP is checked off.Im still figureing this product out but getting better…  Im adding a screen shot :  ThanksBC

Running commserve 11.22.13I just recently opened the flood gates on our new commvault environment and ran a bunch of jobs last night.  All the jobs appear successful but I noticed when I looked at the adminconsole Backup job Summary under the summary section I see “FAILED FOLDERS” was 1,211.  Seems like a lot with only like 15 or so small clients (windows, linux, SQL Server).How do I determine what folders are failing and from what server/client or job.?  Im not having much luck figureing this out myself.   I understand these folders could be folders that are being used and not able to get backup but would like to know what they are.  Thanks in advance   BC 

Have a requirement to stop a specific service prior to backup running so created a simple bat file with “net stop servicename”and configured the bat file in the pre backup command for the subclient. However backup job in pending state and I am getting an error along the lines of “User selection still set to none.”Is there more to the configuration of the bat than just stopping the required service?