but [dmz_ap1] commvault services online.
so i restart services. then it’s status normal
I must restart every morning. What's the cause?
Solved
waiting services on the client to come online
Best answer by Damian Andre
Looks like this has been answer, but the most likely issue is an incorrect network configuration. Commvault has a two-way network topology that connects when needed and disconnects when idle. If one side of the network connection is not configured properly or blocked, it wont be able to re-establish the connection. When you restart services, the client itself reaches out - establishes the connection until it times out due to inactivity.
So I’d say your connectivity from the CommServe towards the client is blocked or configured incorrectly.
+11- Vaulter
- 99 replies
Worth trying to re-install the cv client
If this does not work, check if any other application using the CV port (8400) temporarily? Some SAP third party application for logging and monitoring are known to use this port and hence cause issues intermittently.
+23- Vaulter
- 1300 replies
- Answer
Looks like this has been answer, but the most likely issue is an incorrect network configuration. Commvault has a two-way network topology that connects when needed and disconnects when idle. If one side of the network connection is not configured properly or blocked, it wont be able to re-establish the connection. When you restart services, the client itself reaches out - establishes the connection until it times out due to inactivity.
So I’d say your connectivity from the CommServe towards the client is blocked or configured incorrectly.
+23- Vaulter
- 4996 replies
Not sure if
Reply
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.