Skip to main content
commvault.com commvault.com

Hello, 

I'm currently testing the Hyperscale X 2.1 Reference Architecture deployment and i would like to know if it's possible to configure at 1GB, my network interfaces on Data Protection Network, because when I configure, he tells me " Encouterd error Interface should have at least 10GB" , but when I tested Hyperscale 1.5 Reference Architecture deployment, I was able to configure my interfaces to 1GB for the Data Protection Network without any problem.  So, I would like to confirm if it's possible to use my 1GB interfaces instead of 10GB with Hyperscale X 2.1 for the DPN. Please note that the other interfaces for the SPN and Replication will be on a 10GB link.

@commvault11 , 1.5 allowed a 1 GB link for the management network, but 2.1 requires 10 GB.

Ok, thank you for your answer. Iread that End of life for HyperScale 1.5 Appliance which includes end-of-support for December 31st, 2025. Is this the same thing for 1.5 Reference Architecture? 

Ok, thank you for your answer. Iread that End of life for HyperScale 1.5 Appliance which includes end-of-support for December 31st, 2025. Is this the same thing for 1.5 Reference Architecture? 

 

December 31st, 2026 is end of support - new sales stopped on June 30th. It will be posted to the documentation soon!

Reply


Terms & ConditionsCookie settings