commvault.com commvault.com

Self-Hosted Q&A

Ask and answer questions about your self-managed and on-prem software

  • 4,720 Topics
  • 20,636 Replies

4720 Topics

P
Commvault Certified Expert
PawelCommvault Certified Expert
asked in Self-Hosted Q&A

Migrating SharePoint On-Premise Data to an Office 365 Site

Hello;I would like to restore on-prem sharepoint data to Office 365 with steps from documenatation but I have this messages and I am stuc,.  https://documentation.commvault.com/2023e/expert/creating_office_365_backup_set_for_sharepoint.htmlWhat is the correct procedure?

3
A
Vaulter
7 days ago
G
Byte
GlennoByte
asked in Self-Hosted Q&A

Oracle agent install deploys Media Agent???

Testing the Oracle agent on Centos 07 and when following the deployment guide using the web interface and adding a server / instance i noted that the Media Agent package is selected for installation and subsequently installed/ Why so???? It shows in Console having a red icon so hasn't consumed a licence but why would it install?

2
G
Byte
2 months ago
D
Bit
DCJBit
asked in Self-Hosted Q&A

Update password for domain account used to run tasks/jobs within Commvault

HiWe presently run Commvault version 11.28.36 For some backup tasks/jobs we are using domain accounts. If we update the password to one of these account in Active Directory where do we update the password for the account in Commvault so the task/jobs continue to run?Kind Regards Dean

1
Erase4ndReuseMedia
Byte
1 month ago
A
Byte
AjalByte
asked in Self-Hosted Q&A

hyperscal 1.5 dependancy warning

any help

1
Emils
Vaulter
6 months ago
M
Byte
MauroByte
asked in Self-Hosted Q&A

Dual Encryption question

Good day Vaulters This question is around hardware and Commvault level encryption. If I have encryption enabled on the Maglib (VAST storage with it’s encryption enable), what happens if encryption is enabled on Commvault? Does it try to encrypt the data on the Maglib that has the Hardware vendors encryption already in place? What is the effect on backup AND recovery performance in doing this?Would it be best to leave Encryption on Commvault off in this case? We do need to also have Encryption enabled ‘in transit’. I know that’s done with Network routes. Would there be a performance impact on operations in using this option too? What will both layer of Encryption do to DDB sizing? I’d imagine it could cause bloat? Thanks,Mauro

1
J
Vaulter
2 months ago
M
Byte
MauroByte
asked in Self-Hosted Q&A

MySQL restore and versioning

Good day all I have a customer who is using Xtrabackup as the option to backup/recover MySQL DB’s. The source version is V8.0.29-21 and he’s restoring to a client with V8.0.33-25.In the restore process, we see an error that says that ‘there is nothing to restore - subclient(s) not backed up.The subclient is backed up, so was wondering if this is due to the different versions of MySQL in the job configuration?

1
Sunil
Vaulter
8 months ago
0
Byte
0ber0nByte
posted in Self-Hosted Q&A

Data Priavacy feature - alert or report for affected clients?

Guys,Is there a report or alert to check daily basis if privacy option still remain disable and send to an mail to us ?

6
Mike Struening
Vaulter
2 years ago
P
Byte
PeterrByte
asked in Self-Hosted Q&A

How can I compare the parameters of storage policies, looking for an export rather than calling up the interface side by side.

Looking for a way to extract the parameters of storage polices so we can compare the settings.

2
G
Vaulter
1 month ago
H
Byte
HDawidByte
asked in Self-Hosted Q&A

CommservSurveyUtility.log --> String or binary data would be truncated

Hi team, we try to push fresh data from private metric reporting and it failed.CommservSurveyUtility.log7664  ba0   02/14 11:13:25 ### CommservSurvey::uploadfiles() - Private: Upload started7664  ba0   02/14 11:13:26 ### CommservSurvey::uploadfiles() - Private: Upload succeeded for file : [D:\CommVault\Reports\CommservSurvey\privateupload\CSS1707905605_100AF2_208.xml]7664  ba0   02/14 11:13:26 ### CommservSurvey::uploadfiles() - Private: Upload done7664  ba0   02/14 11:14:38 ### GenerateXML() - RptCommservSurveyProc failed with error [INFO: [String or binary data would be truncated.] [RecNum:1, State:42000, NativeErr:50000, RowNum:1, Severity:16, LineNum:636, Spid:58] ]]... Proceeding with next survey…Any idea how to solve existing issue ?

1
J
Vaulter
3 months ago
K
Keshav Sawant
asked in Self-Hosted Q&A

How to restricted agent uninstall from local user.

we want restricted CV agent uninstall form local user.one more thing require. like if commserve not communicate with client, then can we take backup locally save in d drive. and once communicate with commserver then automatically update on server or target ?is it possible ? how ?  

2
Scott Moseman
Vaulter
2 months ago
L
Bit
LuisMRBit
posted in Self-Hosted Q&A

Ease during SP update

Ease during SP update

1
Scott Moseman
Vaulter
9 months ago
B
Byte
BloopaByte
asked in Self-Hosted Q&A

Issue with schedules after migrating to plan

Hello,to backup our vcenters in liked mode, we have a script that connect to each esxi that host the vcenter, shutdown the vcenter, perform the backup through Commvault api, then start the vcenters.there is no schedule policy on these subclients adfter migrating to plan,there is a schedule policy inside the plan.on the VMgroup (ex subclient)How can I disable the schedule to avoid this VMgroup backed up automatically by Commvault and let the script schedule the backup (ansible)  ?Thanks  

1
C
Vaulter
2 months ago
D
Byte
DennisByte
asked in Self-Hosted Q&A

Delete B2D library failed

Hi,i want to delete my old B2D library. Mount paths was deleted succesfully.Get this error like in my screenshot.What can i do?RegardsDennis 

3
D
Byte
1 year ago
F
Fauzi Japri
asked in Self-Hosted Q&A

MongoDB test restore method

Hi,I’m currently doing MongoDB sharded cluster implementation. I manage to backup the sharded and config server, now trying to do some test restore.Is there any ways that I can simplify the process, without affecting the production server.I understand that I can do out of place restore, but I do need to prepare another set of mongodb server which currently I’m having difficulty to provide the resources.The “Restore files only” option, can I use this to test the restore to another path within the production server? Will this option shutdown the server? regards,Fauzi

2
F
3 months ago
H
Bit
Hariom KumarBit
asked in Self-Hosted Q&A

Keep only one Synthetic full backup

I have created Backup policy every 15 of month it will take synthetic full backup reset incremental. And retention & data ageing for 90 days.Can I configure keep only one synthetic full backup. Pervious synthetic should get deleted

2
H
Bit
7 months ago
K
Bit
Kumar DevarajBit
asked in Self-Hosted Q&A

can we restore ACLs only from VM level backup

Hi team, I am trying to restore ACLs only for one of the folder from VMware backup. is that possible with VM backup. We have configured VM level backup for the server, dont have File system backup Please suggest

1
MichaelCapon
Vaulter
27 days ago
E
Byte
EnzouByte
asked in Self-Hosted Q&A

Azure VM to Commvault

Hello,We currently use Azure Backup Center to backup our Azure VMs, but we want to cut costs, thus we intend to backup those Azure Servers to Commvault.Is it possible to perform a VM Snapshot backup of those Azure servers to Commvault? thus I don't believe installing a file system agent will not work.

1
O
Vaulter
11 months ago
J
Byte
Jean-PaulByte
asked in Self-Hosted Q&A

virtual machine license

Hello,Do virtual machines that are added to the VM filter consume licenses?Do virtual machines that are used only for VSA proxying consume licenses?Thank you

2
J
Byte
1 month ago
E
Byte
Egor SkepkoByte
asked in Self-Hosted Q&A

Install MS Office365 apps

Hello, What is best practise to add onedrive,teams apps to commvault through vpn express tunnel? Do i need to create private endpoint first and how to configure the routing through the endpoint? Now commvault trying to connect through the public address.  I can add package through custom configuraton but failed on authorize app, If i use expres configuration with global user its saying that username/passwoord not correct 

1
A
Vaulter
2 months ago
Nikos.Kyrm
Byte
Nikos.KyrmByte
asked in Self-Hosted Q&A

Backing Up Individual / specific Azure VMs On Demand

Hello Commvault,Is there any option to proceed ad-hoc backup for a specific Azure VM?When I try to do this, I see that Commvault starts a backup for all Azure VM’s that are members in the group!So, Im looking a workaround to backup only a specific Azure VM, not all it’s group. Please for your feedback,Nikos

3
Nikos.Kyrm
Byte
1 year ago
I
Byte
IggyByte
asked in Self-Hosted Q&A

Auxiliary Jobs Not Copying all Jobs

Hello,I am in the process of migrating to a new disk library. For all the Storage Policies I have created new corresponding copies for each site.The current Primary (1) and Synchronous (2) copies have a 30 day basic and 90 day full weekly retention configured.I now created 2 new copies but since I am writing to WORM storage I have configured the retention for both the new copies with 90 day basic retention. My issue is that not all the jobs are being copied. Only the first 4.The rest of the jobs have a status of “To be Copied & Disabled”. What does this mean?How can I get them automatically copied?Should I select the option “Pick for Copy” on all the required jobs? Thanks.Ignes  

2
I
Byte
9 months ago
Heath
Byte
HeathByte
asked in Self-Hosted Q&A

Scheduled report create Dated Folder

I have created some new reports and I found out that you can add cvdate to the end of the file name and it adds the date time, wish it only added date but that is fine.  What I want to know, can Commvault created a current dated directory to put this in?  Right now It goes to a base folder and I have to go create the dated folders.  We need this for Audit purposes and just trying to streamline it even more so I can be out and not have to deal with doing a bunch of folders when I get back from vacation.  Maybe I have to use a 3rd party way, but hoping Commvault can do it.

2
Heath
Byte
7 months ago
M
Byte
MauroByte
asked in Self-Hosted Q&A

Download Center for endpoint

Good dayI”m busy configuring the download center for endpoint package installs. I’ve created the repository using the Web Server options and then added the packages as required and synchronised them.When creating a laptop user and having the invite link sent to them, the below page opens up with no packages published.  If the user navigates to the Webconsole and to the Download Centre, the packages are listed. Ideally I’d prefer the above page to be populate, but not sure when I’m missing?

3
A
Vaulter
18 days ago
M
Melshawy
asked in Self-Hosted Q&A

SLA Question

 I have the SLA dropped down today suddenly. Checking the reason, I find that it is because of client that is being backed up monthly with no change in the configuration.Any idea what could be the reason? I have also checked the sub clients associated; and it is only one Sub client the default one. The schedule is monthly with a Backup option Run Incremental before Synth FYLL backup.  Surprisingly from the backup history only this month I find a separate record for Incremental backup kicked off before the SYNTH FULL which is not the case for the rest of the month. ​

3
Erase4ndReuseMedia
Byte
18 days ago
A
Bit
AndreasBGBit
asked in Self-Hosted Q&A

Shared view with filters

HiIs it possible to share a custom report view, with predefined filters?Each time I create a new view, in the webconsole, the filters is not saved. Thank you. 

2
Aplynx
Vaulter
2 years ago

Badge winners

  • Contributor 1
    MJMhas earned the badge Contributor 1
  • Contributor 150
    HolowEdhas earned the badge Contributor 150
  • Solver 5
    Shaun Hunthas earned the badge Solver 5
  • Topic Starter 5
    kitty-yiphas earned the badge Topic Starter 5
  • Contributor 1
    alexmchas earned the badge Contributor 1
Show all badges
Terms & ConditionsCookie settings