Hi,on my new DC (behind an internal Sophos firewall) i have installed the AD plugin for commvault.When i try to browse i can’t see the content of my AD.On other DCs (no FW between it) it works fine.The network admin says that nothing is blocked.He catches the traffic from DC to Mediagent and Commcell.What can causes this?RegardsDennis
Api : /commandcenter/api/Backupsetrequest:{"entity":[{"clientName":"vCenter","backupsetName":"dummy_backup_set","instanceName":"VMware","appName":"Virtual Server"}]} Currently using above endpoint and request and getting below error output{"errorMessage":"No application type is specified.","errorCode":1}Anybody having any idea regarding this?Thank you in advance!!!
Hi Team, I'm very new to the Rest API, but I was only able to create an authtoken :) As far as I learned, when the authtoken is created, the max. It can be used for 30 days. After this period, it is necessary to create a new authtoken and use the new authtoken. We are thinking something like this, Is it possible to do this?We are trying to create a powershell script, this script will create a new authtoken every time it runs and will automatically use the new authtoken, then we will be able to GET the information we want from Commvault. Rest
Hello, Community. There is a cluster of three nodes. 1 primary and 2 secondary.When I make a backup from one of the nodes, I get the following error:Error Code: [14:109]Description: Index processing failed on MediaAgent. This may be due to the index cache being full or because of a corrupt index.Source: 5, Process: MongoDBCtrlWhen I make a backup from another node, I get the following error:Error Code: [7:276]Description: Failed to start [backup] on node [3]Source: 4, Process: MongoDB how to deal with these errors?
Hi, We had our Oracle RAC being backup by the Commvault. The backup is running ever since with any config changes or past issue but suddenly our DB team complaining of latency issue due to Commvault is doing backup of data in node which is the active which consume a lot of memory and cpu resources of the DB servers. The DB is questioning why the backup is performed in the node 1(active) as they assume it runs in node 2 before that is why no latency issue encountered in their end. The challenge question to Commvault is is there a way the backup process is deviating from doing backup from one node to do it in another node automatically? What is the behavior of Commvault Oracle RAC backup, where the data is read to which node and is there a way to change it by default to read in another node of the cluster?
Does anyone know how to retire an Index/Analysis Server that contains roles? I can get all of the roles to remove except the last one. I also just attempt to right-click on the Index Server entity and choose Delete, but it says that it is associated to DC Plans [ODA_DCPLAN_8534] and to remove the connection and try again. We only have 2 plans - Threat Analysis and FSO. There is no association or relationship I can find in the Command Center to either plan let alone any other backup plans. All I want to do is delete the Index Server I created - there isn’t any data on it. It had another node on it at one time, but I also removed that from the configuration hoping to tear it down one piece at a time. Please help! Very frustrating. We are running Windows Server 2022 on the CS and FSO/Threat Analysis on the 2 Index Servers. These servers are VMs.
In Metallic, as per the plans weekly selective full backup is configured but weekly synthetic full backup is running and monthly full is running. how it is possible?
Hi All, We have a huge file system ( ~40TB with over 300M files ).It can be backed up with NDMP or to be mounted as NFS on a file server.The backup takes a lot of time to complete.What are the best practices / options in Commvault for such FS ?Block level backup maybe ?? Thanks
Hi All, i would like to find out if it is possible to send logs files to a different location than the Deduplicated library used for DB backups. I want to send my log backups to a non deduplicated Library. I am aware that Commvault knows how to handle Logs in a dedupe policy but I would prefer to have them stored in a different Library so they don't go through the Dedupe Engine. I know in Storage policy days we could have an Incremental policy assigned and would like to know if we can do the same with Plans. Thanks in Advance MeatBall :)
I have used the apis to retire and delete the VMs but since the VMs are added everytime manually in the subclient, I would like to use the API to remove it from the content as well. I used the below mentioned API and it deletes the complete content. I just want one VM to be removed.import requestsurl = "https://commandcenterhostname/commandcenter/api/Subclient/100/content"payload = json.dumps({ "children": [ { "allOrAnyChildren": True, "displayName": "test", "equalsOrNotEquals": True, "name": "503a1c32-6616-10ds-k9l8-130535306451", "path": "" } ]})headers = { 'Content-Type': 'application/json', 'Authorization': '*token*'}response = requests.request("PUT", url, headers=headers, data=payload, verify=False)print(response.text)
Error Code: [68:591]Description: File [E:\Commvault\Data\SW\CVMedia\11.0.0\SP32_5494260_R1191\Windows\version.txt] has different checksum [3142874110] than the expected one [3849617823]. Please contact the support.Source: commserv, Process: DownloadSoftware
Hi,Just a quick question on the Bonded Topology for HyperScale X Reference Architecture.I can see from the BOL that the Storage Pool IP Address should be resolvable to the CommServe server !! Is this a new setting ? I have seen HSX config’s where the storage pool ip address is on a 192.168 range and the CommServe on a 10.10 range with no second nic for a 192.168 range. Thanks
Hi All.I have a setup with DD9400 which is my production library and I have replication to Vault which is DD9900. We are trying to restore the data which is from the vault in the production site. I have created one mtree/storage and made it as library, I have created one more mtree/storage and made it as my vault replication. I want to restore the data which is getting replicated from vault to prod. Is it possible to do this task in Commvault. RegardsVijay
Do we have any option to perform Incremental restore.we have tested the Namespace and Application level restore( in and out of place restore). while performing the out of place restore for already existing namespace , if overwrite option is not enabled restoration fails and it succeeds if overwrite option is enabled. In backend this overwrite deletes all the existing resources from the namespaces and recreates again. we are not able to achieve the incremental restore which is not suitable for the TB’s of data size.
Actually, I want to configure DR site and replicate VM on DR site. How ?as I think, first ready DR commvault site, means separately install commserve on different location with multi-instance on primary site and then live sync option through VM replicate to DR site.Right?.If I am wrong, then please correct and guide me.
Hi,In today's unpredictable world, data loss can strike from anywhere – a natural disaster, ransomware attack, or even human error. I do the DR backup everyday. I just wonder, when disasters happen, what are the most critical things do I need to get our data back? Stable internet connection Access to CommServer Access to HyperScale nodes Access to tapesThank you.
Hello, What are the hardware/software specifications for setting up access/proxy nodes for OpenVMS backup? Documentation just states it should have filesystem agent installed but no further details are published.
Hello , Sometimes the Comandcenter Website is suddenly unreachable . When i connect to the comweb Server i can see that the tomcat Service is not startet . In the Event log i find an Entry with the Tomcat service stopped unexpectly. We use the Version 11.28.93..Any Ideas ? Thanks Michael
Hello, Is there a way to be actively informed by Commvault when new vulnerabilities are discovered?We would like to have this alert sent to our email distribution list.RegardsThomas
Hi team, We are on the way to make SLA Report more consistent by remove not scheduled host.Looking for any suggestion how smart group should looks like ?Create one manual group for all schedule policies and second smart client association to the schedule policies - not equal - [previous create SP] Or... Client by schedule interval - equal to - daily For all above situation advance settings KPI → Exclude from SLA
Creating a Global Non-Deduplication Enabled Storage PolicyOnce you create a global non-deduplication policy, you can use it to enable global non-deduplication for any storage policy.Download the SP_creation.xml file and save it on the computer from where the command will be executed. Before running the command, review the Available Parameters for Storage Policy Configuration. Execute the following command from the software_installation_directory**/Base folder after substituting the parameter values. qoperation execute -af <downloaded location>\sp_copycreation.xml -storagePolicyName 'xxxxx' useGlobalStoragePolicy 1 -useGlobalPolicy/storagePolicyName "xxxxx" -retainArchiverDataForDays xx -retainBackupDataForCycles xx -retainBackupDataForDays xx -copyName 'xxxxx' For example, to create a global non-deduplication enabled storage policy, with name SP1, that is using SP_GDSP as a global non-deduplication policy, execute following command: Here it is creating a stroge policy using
I have created a workflow to configure Azure NetApp NAS Storage Backupnow i am calling this workflow from VRA/VRO through REST API , VRA/VRo teams wants more details on response after executing the workflow with the success staus of the client configurationAs of now VRA/VRO receives on the workflow execution job ID, after rest api call. VRA admin needs to have more details send back to VRA as response , like the workflow execution staus, client creation status. How i can achieve this ?
I’ve installed CV2023e on Windows 2022 server. Connected a Fujitsu Eternus LT40S2 however CV is unable to configure the library. See images. OS detects the library. What could be the issue? REgards,
Hi Good Day,I like to know whether two HyperscaleX located in different DCs (25 KM distance between DCs) can register with a Single Commserv sitting in one of its DC? Is this workable and any thing to consider before setting up.Also like to know an auxilary copy can be send to opposing DCs HSX devices managed by Single commserve.
Hello Team,We want take backup of VM's from OVMM environment and then restore to KVM environment (with out any modification of VM's).Is it possible from Commvault backup solution.
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
