Commvault Cloud Topics

  on Apollo 4200 server, we have set up all HW configurations as per Commvault documentation and then loaded ISO in ILO.Later the installation completed as above attached . But when i click "finish" button server reboots and screen is stuck in commvault hypercale page, please guide with next steps. we can see a cursor below, but no response  when we click enter.

Dear Commvault,We are facing problem in a restore of a shared folder (within a Windows Server VM).Data files are restored but not their share permissions. Is there any schedule for share permission restore, maybe from registry level?Please for your feedback,Nikos

Hello Commvault Community,While restoring SQL DB to “D” and “E” drive we are getting the below error.Description: Encountered error while writing to the file. Error code [28]. Please make sure there is enough disk space on [C:\Program Files\Commvault\ContentStore\iDataAgent\JobResults\CV_JobResults\2\0\18631087\RstStage].I would like to know why the CV_JobResults is taking so much of space (67GB) on “C” drive. In the other hand we have another server where CV_JobResults is availble in “D” drive is taking less space (67KB).If this issue created for the content store available on the Drives, could you please assist me if I can change the path and how. If not please suggest the solutions.

Hello,I made a restoration of VM in a client aws account : Start timeApr 30, 2024, 9:07:22 PMElapsed time                1 hours 4 minutes 39 secondsEnd timeApr 30, 2024, 10:12:03 PMDuration                 1 hours 4 minutes 41 secondsAverage throughput                 42.43 GB/hrSize of application                 45.72 GBTo be restored1No of files restored1 How can we improve speed restoration, there are some tunnings features to increase the restoration. We got grid MA : instance type :  r5.4xlarge ebs : gp3 iops 3000  The CPU on MA is under-provisioned Thanks a lot for your help. Regards. Karim

how to do multiple stream restore of a single VM with 10 disk  and sized 10 TB.Does CV 11.28 or later version support multiple stream restore for single VM with multiple disk.

HiI have a problem with automatic selecting inc SnapShots for Backup Copy → see post:   (I have opened a case and it seems that I have found another bug) I wish to do this via script:  because there is no way to do this via REST or Powershell I’m now looking for a way to do this with qoperation … is this possible ? Best regards Frank

Hi,We are trying to do a Postgres DumpBasedBackupSet Restore, but it takes longer for restore to finish.Like 300Gb take a 1 ½  day and we end up killing the job!!!Any help/suggestions to improve the speed?On hardware side we have enough resources:Source:Postgres version : 10.17OS: CentOS stream 8 Destine:Postgres version : 14.11OS: CentOS stream 9 During restore I can’t see the throughput or number of stream allocated. Thanks,

Hello Commvault Community, On one of the PostgreSQL agents, a full backup job ends with a status of ‘Completed with errors’.PostGresBackupChild.log30386 76b9 04/14 21:02:05 454909 ConnectGroupInternal: setsockopt failed. Error [0xECCC005F:{CQiSocket::SetSockOpt(567)/ErrNo.95.(Operation not supported)}]30386 76b2 04/14 21:02:06 454909 ClBackupFile::OpenFilesForBackup(7033) - failed to stat path '/pgdbs/ksef/pgdata/tablespaces/ksef_data/PG_14_202107181/16389/pg_internal.init', errno=2, error=No such file or directory30386 76b2 04/14 21:02:06 454909 ClBackupFile::UseIndexForFailedFiles(13358) - Will not store failed file information in index as this is not a file system backup. 30386 76b2 04/14 21:02:06 454909 ClBackupFile::OpenFilesForBackup(7601) - 1 files in a row failed to be backed up.30386 76b2 04/14 21:02:06 454909 ClBackupFile::OpenFilesForBackup(7033) - failed to stat path '/pgdbs/ksef/pgdata/tablespaces/ksef_data/PG_14_202107181/16389/t21_900557245', errno=2, error=No such file

Is there a way to check the last replication time of the CommServe LiveSync? Or any other way to ensure that the CommServe LiveSync works fine via REST API (or Qcommand)?

Hello all,We are getting an error when trying to add a new node on 3 nodes cluster Hyperscales 3.x.Is there anyone who has done this and can give some tips ?Regards,Fabrice 

Hi Community,We have Data Domains as our primary storage for Commvault and tape for long term retention. We are looking to replace the tape libraries within the next year with DD Cloud Tier. With DDBoost now fully supported as access and client libraries does anyone know if and when DD Cloud Tier may be integrated and supported.

 I have the SLA dropped down today suddenly. Checking the reason, I find that it is because of client that is being backed up monthly with no change in the configuration.Any idea what could be the reason? I have also checked the sub clients associated; and it is only one Sub client the default one. The schedule is monthly with a Backup option Run Incremental before Synth FYLL backup.  Surprisingly from the backup history only this month I find a separate record for Incremental backup kicked off before the SYNTH FULL which is not the case for the rest of the month. ​

Hello,We have been notified of a vulnerability in the Commvault Agents in tenable. Is there a date by which this vulnerability can be fixed with a patch?CVE-2023-38545 - Curl 7.69 < 8.4.0 Heap Buffer OverflowPath : /opt/commvault/Base64/libcurl.so Installed version : 8.0.1 Fixed version : 8.4.0RegardsThomas

I need to put this out there as this has been pointed out to me in a support case, as I was told I was running an unsupported configuration for 1-touch backupsMy unsupported configuration?  Running RHEL8.9.Yes, running a fully patched version of RHEL is currently unsupported for 1-touch backup.So I’m running 11.32.49, and here is the supported  list of versions (the chart is the same for 11.34) link here Now here is the thing about this - RHEL8.7 was superseded by RHEL8.8 May 2023, which was superseded by RHEL8.9 November 2023.  Release dates hereSo 1-touch backups for a RHEL8 fully patched system have been unsupported by Commvault since May 2023.  If you look at that support list only RHEL8.6 with Extended Update Support is currently supported by both Commvault and Redhat (Red Had info here)It’s even worse if you look at the RHEL9 info.  RHEL9.0 was superseded by RHEL9.1 in November 2022 (and superseded up to RHEL9.3 as of now).  So no version of RHEL9 is actually currently supported

Hi I need to do backup assessment on security and best practices, do we have a template to cover what's needs to be checked and reported ?  thanksshanmartin

I am trying to calculate the number of API calls that would be made for transferring to Glacier. Documentation says that objects are 32MB in size, are the objects uploaded in one 32MB Put or is MPU used at the default 8MB?

Hi,I have a new install on Ref Arch version 11.32I am going through the “what to do next” BOL to make sure all is secure. For the Firewall I run # firewall-cmd --state but I do not get a response telling me the state of the firewall.  I run another cmd I found systemctl status firewall and it replies. Any reason why the CV cmd in BOL does not work ?  

What’s the command to get the gluster version ?For the OS we run uname -r which gives us the following out put.3.10.0-1160.108.1.el7.x86_64Looking for the same detailed output in a gluster version command. We should be running version “6.0-63.el7rhgs.x86_64” and would like to verify that we are. Thankshttps://documentation.commvault.com/2023e/expert/hyperscale_1_5_platform_version_1_2403.html

Hello guys, i need your opinion about what is the best rout to take in order to perform an Aux Copy from StoreOnce catalyst to azure. so my question is this :is it preferable to just create a blob storage and the create an Aux copy to send the data to Azure or to create a VSA StoreOnce to azure and do a copy Between the to StoreOnce catalyst ?what is the best approach from your side to this situation ? 

Hi Guys,  I would suggest reporting mainly on monthly basis to the customer  SLA, Failed jobs statistics, Libraries growth rate.  Does anyone have better report information? any insights on that please ?

Hi everyone,We updated our CommCell from version 11.24 to version 11.32.49 on 20 April. Immediately after the update, the cloud backup (M365 Exchange and OneDrive) still worked, but no longer does. I therefore do not know whether the following problem is related to the update:The backup of M365 Exchange and Azure no longer works:   We have already recreated the APP including the service account and checked the authorisations in the tenant. We cannot find any errors.The Commcell, the MediaAgent and the Accessnode all have version 11.32.49 installed.Does anyone have any ideas? Thanks & regards Pascal

Hi Techies, We have 11.32.49 and its job controller do not show correct job status / progress in Java console. Sometime it will update real-time, sometime 20 to 30 minutes delay. Thought we have open a support case and awaiting RCA. In the meantime, I am sure many of you have come across similar issues.  This problem that I explained above is with all types of jobs. In fact library space also messed up badly.  

Recently I was tasked with restoring ACLs on a file share that was accidentally overwritten.  When I started working on the recovery I had an issue that I was  unable to see what the permissions were on the folders and files in the backup and the only way I was able to determine which backup had the data that I needed was to restore multiple times until I was able to find a backup that had the ACLs on them.  Is there a better way to do this?  Is there an option in Commvault that I’m not aware of to be able to view the ACLs on the backup copies of the data? Thanks for your time.-Adam

Background: We are taking weekly synthetic fulls (daily incrementals) and only writing the “last full of the month” to tapes.Question: If we moved to *not* doing weekly syn fulls and chose something else like bi-monthly or 1 Syn full/month, all other things being the equal (like our retention and tape writing stays the same), are there any benefits to storage on disk or “possible issues to consider”?Comments: I bet “restoring something is likely to take longer as it may have to reconcile many more incrementals” but I’m mostly hoping that less syn fulls - less data stored on local storage, but I’m not sure if this is true.  I can’t think of any other possible issues other than if you have corrupt/bad incrementals (for whatever reason), that would be much more of an issue than always having a weekly full to compensate, if a restore was needed.

Guten Tag, wir haben eine Tape Library die in der Vergangenheit verschiedene Jobs aufbewahrt hatte. Nun haben wir das Problem das die Library vollgelaufen ist und wir bestimmte Bänder nicht freibekommen, weil verschiedene Jobs die nicht ausgealtert sind das Band nicht freigeben und teilweise wegen ein Job noch gehalten wird.  Wir wollen versuchen jetzt in Zukunft ein sauberen Jobs auf dieTapelibrary bringen.  Kann man irgendwo in Commvault einstellen das bestimmte Jobs einer Storage Policy in eine bestimmte Medien Gruppe / Storage Pool der Tape Library geht und andere Jobs die halt eine kürze Vorhalte Zeit haben dann woanders auf der Library kopieren. So das sie nicht im gleichen Medien unterkommen? Vielen Dank für die Zeit zum lesen.