Commvault Cloud Topics

Hi all, When creating a disk library on a media agent, I get the folllowing error message: Installation Directory lookup failed for given MediaAgent. Doesn’t matter if I select a local folder or a network location… We are running feature release 11.24… Anyone any idea where to look? Regards,Bart

SQL AON backup is configured and it is known that the DB backup runs via primary node and log backup runs based on the preference settings. It was running as expected.  However, when the failover happens at DB side primary becomes secondary and vice versa. But the SQL Backup Master is still pointing to the same old primary node.  How can we make the SQL backup master services to be rolled back to the new primary node.

Hi, I’m currently having a HyperScale X2.2 configure with two bonds (one DP, one SP) I will need to add another one, on a different network to create a DIP. What is the best way ? On the Linux prompt ./cvnwlacpbond.py -c -m 802.3ad -t sp -i 172.19.80.201 -f enpsf7 enps11 -n 255.255.255.0 ? Is it going to be an SP network or it needs to be and DP network or ? There is no default gateway on this network ! 

I’m in process of replacing a couple of Windows based Commvault A600 media agent appliances with Linux based media agents that are virtualized.  We downsized greatly and our backup needs are a lot smaller, plus the A600s are now EOL. I’m trying to gather all best practices for configuring the Linux MA, specifically regarding disk parameters (size, blocksize, alignment,etc.).  The A600s were originally built by an automated setup process built by Commvault out of box. I’m doing this all manually for the new build. My current MA houses about 10TB of data, which works out to an app size of about 45TB.  My DDB currently consumes about 30GB on disk.  Our needs will likely decrease over time vs increase. I plan to provide a single 12TB volume (64KB block size) for the library content and about a 100GB single volume (4KB block size) for the dedupe database. Is this OK?  The A600 is currently able to provide 150TB and the setup created

Team,From last 2 weeks we are observing performance issues with Vmware snapshot backup over SAN mode.vMware backup jobs are taking 2-3 days to complete , throughput has declined from 1 TB/hr to 50 GB/hr.The underlying backup library is healthy with no disk failures .I see in command center health report that disk pruning status as critical for global vmware deduplication policy . data aging is running on daily basis .How can i manually run pruning of DDB ? Is there any impact on running backup while pruning DDB manually. There is an option to validate and Also , what does Read, write and network % means in Average throughout which is very low .Average throughput 64.27 GB/hr(Read: 14.19%, Write: 0.83%, Network: 84.96%)Regards, Mohit

GOODDAY FAMILY, PLS WHY IS MY EXCHANGE DATABASE NOt SHOWING AREA WERE TO ENABLE FOR BACKUP FOR THIS REASON AM UNABLE TO ENABLE FOR BACKUP WHILE OTHERS HAVE ENABLE BUTTON AND THEY ARE CURRENTLY RUNNING PLS HELP I GUESS THERE IS ISSUE I ALSO ATTACH PICTURE SHOWING THE ERROR .  

We are currently having Commvault setup in Amazon. To our customers we are having a cascading Network proxy. Commvault is setting up a tunnel from the Network proxy in amazon to the network proxy at our customer site.I would like to know what kind of traffic is being used between the two network proxies? (tunnel)Is it save to send this traffic over the internet without VPN? Thanks in advance!

I’ve configured File Archiving for a customer on a Ntapp NAS device.Everything is working correctly during a recall operation on all files that have been archived, except *.pdf files. When you try recall you get the below error:  You’ll click ‘OK’ and then try the recall a second time and it runs successfully and the file opens.Adobe Reader is the default PDF application on the user’s workstation. This is being noted on all user workstations.Any ideas on how to resolve this? Thanks.Mauro

Hi everyone, When we make a full copy, the performance is very slow and takes many days.I have done a test and I think the performance is not good. Backups work, but we don't know how to find the real performance problem.Agent type: file system    

Hey,I’m trying to backup a SQL server instance but  I'm getting the following error when trying.Error Code: [19:1109]Description: Please check the log files for this job for more details.Source: XXXXXX, Process: JobManager -Also installed is a FS agent on the machinetobackup-credentials are correct,I’m able to connect from SSMS-I have similar/almost identical machine with the same setup and SQL server.working greatAlso checked the logs for this job and i’m getting the following5360  2124  09/23 08:58:45 181838 Service     -> SYS RESUMED <- Automatically resumed5360  1538  09/23 08:58:50 181838 Scheduler  Phase [4-Database Backup] (0,0) started on [machinetobackup] in [1] second(s) - SQLBackup.exe BACKUP -j 181838 -a 2:506 -t 1 -d agentmachine.domain*agentmachine*8400 -data

Greetings!Attempting to apply a feature update going from 11.23 to 11.24 however the install has failed during the upgrade. The Setup installer displays the error code: [Error: Failed to update Web Server(WebServer) with error code 0x80091007] - a few of web searches seem to indicate that a possible hash mismatch may cause this error code - I have verified the authenticode signature of the underlying .msi file as valid.I have reviewed the install.log file and have not found any other reported failures or errors.Any advice or tips on where to look next would be appreciated

Hi There.I am searching for technical resources on how we setup an air-gapped environment.The idea is to have an isolated HSX cluster that we air-gap from the production HSX cluster and used only for Aux Copies long retention.I checked the online documentation and the internet on how CV achieve this with no luck. I want to use a VM as a network gateway proxy with blackout window and network topology. I just didn't find how we can automatically shutdown and power up the VM to isolate the air-gapped environment.Searched for workflow but couldn’t find anything relevant.Anyone did this before and if so how was it done ?ThanksAbdel

Hi,We have some issues with our use of our cloud backend (scality ring).When running backup or data verification the request send by the media agent create some peak of use on the juniper switch (QFX 5100). that causing drop of packet and in result in commvault error reading chunk. we have multiple bad chunk alerts.the network team ask us to set a limitation of the network bandwith to limit peak on juniper switch.how can it be possible to limit the bandwith between media agent and cloud librairies ?kind regards,

Hello Guys, I’m implementing Software Encryption using Commvault built-in Key Management Server. May I know, how we can check the performance on the job running with encryption enabled? Thanks. 

Recently i have added new Mac OS (Big Sur) machine. Now getting:Error Code: [10:10]. Description: Shared memory and or semaphores have not been adequately set up as per the operational guidelines on the client machine.Kindly help if someone came across same kind off issue.Thanks

Has anyone replaced the self-signed java certificates with an in-house certificate chain?  What is the default keystore password located in (DRIVELETTER):\Program Files\Commvault\ContentStore\Apache\mykeystore.jks Anyone?  Bueller?  Bueller?  Bueller? Thanks!

Can the CommServe installation created during Testing CommServe Failover Using Disaster Recovery (DR) Backups procedure be maintained after the test? Do I need to turn off the server or to shutdown Commvault Services?

i am trying to restore the single file from the windows image backup , Received the below error "Browse failed due to error while mounting virtual machine: Internal error during Pseudomount of Guest disks." can any one help to fix the issue 

Hi, I’m getting this errorError Code: [30:385]Description: Failed to choose agent for backup for backup type [Transaction Log], reason [Failed to update AG information of MSSQLAGInstance. ].Source: hsapsqldb9, Process: SQLBackupMaster tried to restart the services on the cluster members - didn’t help

Good evening all I've never upgraded a Service Pack in a LiveSync configuration. I know that you usually run the 'install updates' command on a secondary commserve with the 'do not update db' parameter. In a LiveSync configuration, do you install the Service Pack on each commserve and treat it as the primary during the upgrade or install via command line and 'do not update db'?  Thanks,Mauro

Dear Team,Hope you are doing good and safe! I need your help, i would like to add the below additional details of Azure VMs in the Chargeback report, does anyone has code or script to build it?Azure Subscription nameAzure Resource groupAzure VM TagsBackup cost of Azure blob storage based on the backup sizeThanks

Hi,We are backing up PostgreSQL systems with block-level at customer site. We are doing individual db restore from commcell console but our customer wants to do this from command center. In Instances tab i can see PostgreSQL instances but in Databases tab it says no results found. Is it possible to see PostgreSQL databases in command center like MS SQL databases?Commvault version is: 11.20.60 Instances Databases​​​​​ 

@Ron Potts Looking through some documentation for Commvault, i have found what seems to be conflicting information, and would just like to have it clarified if site collection backups are supported or not.This documentation, under “Note” says “You cannot back up site collections.”Configuration Decision for SharePoint Server Agent (commvault.com) While this documentation says “Site Collection Backups Set: Full Backups” with a checkbox as supported.Supported Features - Microsoft SharePoint Server Agent (commvault.com) So if site collection backups are supported, can someone point me to the documentation on how to co

Hello, I come across there is solution offering from commvault -Netapp as netapp SDP. for a customer who uses netapp( nas filers for vmware datastore, data archive) for business loads how will the Netapp SDP can be option that we use currently hyperscale as backup target 

Good Afternoon,Whenever a colleague logs onto one of our laptops they have multiple windows popup and disappear including Commvault edge monitor as it starts. Is it possible to hide the loading screen?John