Hoping to get an answer from the very well educated Community on the following question! What is the data path for Linux VM file / folder restorations done using FREL? What talks to what and over what port? Obviously, we have Media Agent and the VSA Access node involved writing directly into the ESXi datastore but where does the FREL fit into the connectivity picture?I have multiple ESXi hosts and a complex firewall configuration. I’m assuming a single FREL can service multiple ESXI hosts without issue but what ports do I need to open between which devices and which way? I’m guessing ports 8400 and 8403 but between which devices? TIA!
Hello all!Hope You are all doing fine!We are having a problem within our environment related with One Drive backup. For last few days we are getting this errors: This “Generic download failure error” does not tell a lot to continue troubleshooting.Maybe one of You actually faced this kind of problem and know any to fix it or troubleshoot?
Hello everyone,instead of assigning management permissions to a Hyperscale X after it has been configured (hsxsetup), is it possible to use the tenant admin account during the join to the commserve phase?Thanks and regards
I have created s3 cloud library , now I need to share the mount path to another MA agent.https://documentation.commvault.com/2022e/expert/adding_new_mediaagent_to_cloud_storage_device.htmlBy Using Device IDhttps://documentation.commvault.com/2023e/expert/files/products/media_agent/xml/ShareMountpath.xmlYou can use the device ID to share a mount path with one or more MediaAgents Here I can see sharing mount path using device IDs, I need the same using names, not IDs I can see xml parameter for Disklibrary , need xml file for cloud lbrary – mount path sharing.
Hi. CV version is 11.32.45, we want enable compliance lock (CL) on local disk storage. For what I can read, there no DDB sealing involve with that option vs WORM at hardware level.With no DDB sealing, we should not have have space increase by enabling CL?Am I right?
Hello,I have a customer with Hyperscale X that currently set with a single card for Data Protection Network and another single card for the Storage Pool.There is a documentation or reference that I can use to change the actual network configuration to LACP or Active/Passive when everything is on production ?Thanks,Christian
HIi get the errorNo service account(s) found for public folder processing. Please assure that a service account is assigned a malibox association with owner permissions on the root and subroot public folders in order to proceed with public folder operations.Source: exch01, Process: CVMailBackupCoordinatorwhen back up the public folders. on exchange on Prem. Serivce account is administrator and has permission to root of Public folder and all subfolders.Thanks for help.Pavel
Hi team, We are on the way to make SLA Report more consistent by remove not scheduled host.Looking for any suggestion how smart group should looks like ?Create one manual group for all schedule policies and second smart client association to the schedule policies - not equal - [previous create SP] Or... Client by schedule interval - equal to - daily For all above situation advance settings KPI → Exclude from SLA
Hello, Is there a way to be actively informed by Commvault when new vulnerabilities are discovered?We would like to have this alert sent to our email distribution list.RegardsThomas
can any one help me with required permssion for vsphere user for backup and restore operation the one in the link is old i guess , most of the permission i cannot see in the vsphere side , using vsphere 7https://documentation.commvault.com/2023e/expert/permissions_for_vsphere_custom_user_accounts.html
Hello , Sometimes the Comandcenter Website is suddenly unreachable . When i connect to the comweb Server i can see that the tomcat Service is not startet . In the Event log i find an Entry with the Tomcat service stopped unexpectly. We use the Version 11.28.93..Any Ideas ? Thanks Michael
Hi All,I want to install manually for Linux but when I run the command cvpkgaddthere is an error:I've followed what was on the previous forum but still can'tany idea?
"I want to restore a PostgreSQL database using schema and data from a DumpBased backup, but I'm encountering the following error." Error code: [94:19]Description: PostgreSQL Database: [~dsin~] Restore Failed with PostgreSQL Error: [~Make sure all dependent tables are selected for table level restore. PG Error -- pg_restore: warning: line ignored: 35 pg_restore: warning: line ignored: 35 pg_restore: warning: line ignored: 29 pg_restore: warning: line ignored: 29 pg_restore: warning: line ignored: 29 pg_restore: warning: line ignored: 29 pg_restore: warning: line ignored: 29 pg_restore: warning: line ignored: 29 "In the logs, it says that it cannot find some schemas at the destination." help please!!
Hello everyone, please help me understand if there is such an opportunity in the api? There is such a method - according to the cat, I can get a request from the developers of Commvault - GET <webservice>/Client HTTP/1.1 Yes, it returns a list of all objects, but there is not complete information about the object and there is a method for obtaining complete information - GET <webservice>/Client/{ClientID} HTTP/1.1 The question is that I have a list of unique IDs or Names and I want to upload full information on them right away, but there is no way in Python to do this. Is it possible to do this at all, or will you have to cycle through all the IDs and unload them piece by piece and slowly?
Hi all,I would like to discuss location and sizing of fundamental installation directory. Installation Path - it should be the local system disk, required space will be used from the system diskIndex Cache Path - it shouldnt be the local system disk, at least 200GB free space neededDatabase Engine Installation Path - could it be the local system drive? The space is allocated by the installer itselfCommserve Database Installation Path - at least 200 GB free space for Medium environment, should it be different than local drive?Disaster Recovery Path - it has to be available if the local system crashesCheers!
please let me know , if i am deploying HSX reference architecture to existing commcell 11.32 , then what are the ports i should open between Commserv server, HSX nodes and clients ?Do i only need to open ports specific to Media agents given in below link between HSX nodes , commserv server ?https://documentation.commvault.com/2023e/essential/port_requirements_for_commvault.htmlapart from above ‘General commvault ports’ should i also open below HSX specific ports between HSX nodes , commserv server and clients? dont i need to open these HSX ports if i am not enabling firewall in HSX nodes ?https://documentation.commvault.com/2023e/essential/firewall_port_requirements_for_hyperscale_x_reference_architecture.html
I would like to ask for opinions /best practice from field experts on how to build a properly configured VMware VSA proxy which is going ot be use primarily using the hotadd transport. I have not seen any information in Commvault books online on the details on how to build.Information I am looking such as:1. How many disks and sizes for each2. Block size for each disk3. disk configuration settings and stateAny information provided will help Please note this is for Commvault v11.24 or later and running Windows Server 2022 etc.
Hi All.I have a setup with DD9400 which is my production library and I have replication to Vault which is DD9900. We are trying to restore the data which is from the vault in the production site. I have created one mtree/storage and made it as library, I have created one more mtree/storage and made it as my vault replication. I want to restore the data which is getting replicated from vault to prod. Is it possible to do this task in Commvault. RegardsVijay
Hello guys, I have 2 Maxdb databases configured in the same client where one of them completes sucessfully and the another one gets the following error: Details:OK ERR -24927,ERR_TOOLCHK: External backup tool not found The file '/opt/commvault/SapMaxDbAgent/in' already exists. I already remove the in, out and err files from the directory, but the error persist. Could you please helpe me fixing it?
Hi All, i have an to do Moving a Mount Path to an Existing Device . So what i have done: Disabel for new data weeks ago Today disable mountpath for pruning Added an new mountpath in disc the library starte the move mountpath operation Job started and now copy data So thats all okay bute now i have a question. Actually the schedule is off. But how can i prevent that backups are written to the new mountpath when i enable the schedule.
Is there a way to reduce M365 licenses? We have already deactivated the Teams backups and Sharepoint backups because there is also an Azure recycle bin available. One idea would be to reduce the retention time. Does this mean anything in terms of licenses? Thanks for your tips!
Hello,Is there a report to list all VMs and the plan/storage policy related to them?
Actually, I want to configure DR site and replicate VM on DR site. How ?as I think, first ready DR commvault site, means separately install commserve on different location with multi-instance on primary site and then live sync option through VM replicate to DR site.Right?.If I am wrong, then please correct and guide me.
Hiwith the latest version of Commvault which has only webcosole management i dont know how to enable edge drive. Protect - File Server - New Client - item Edge Drive missThanks for HelpPavel
Hello,I have a SolarWinds SNMP server that takes all Windows events from the Microsoft Event Viewer. It took Event 256. But inside this event, there are other events that start at 4125*. Can I filter these numbers to understand which job they are related to?
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
