Commvault Cloud Topics

Hi i have a question about DDB assignment.In my environment i have 2 file DDB for same disklibraryI think it was created by mistake when creating a new storage policy. So my question is can i remove (seal) the 1 DDB that i dont need? and will the storage policy using that DDB switch over to the other DDB? they are both under the same Global DDB.the reason this is a problem is that this DDB is located on the comserve nodes and they dont handle this load well. i could of course move the DDB but i would prefer to remove them instead.

i*m using Hyperscale x nodes that are also Vsaproxyswhen adding a new Fcdisk to the node it will not be discoverd automatically.Is there an option to let discover the Hyperscale node the SAN Disk. ..Chr 

Hi,Good day.We need your expert recommendations on this matter.Just wondering if there are specific parameters on IBM i (client) or Commvault that we can modify to improve our IBM i backup simulation. IBM i Test POCPower 8 running IBM i 7.4 on external storage SAS drivesNetwork: 1x4 ports 1GB (aggregated) but planning to use 10GB in the actual environmentCore: 0.8Memory: 16GBDisk: 84x150GB Current Backup Parameters and Scenario:We tried to run *ALLUSR subclient with 6.5TB capacity and took about 15hrs to finished.SAVE WHILE ACTIVE *NONumber of readers: 8Network agents: 4Compression: On the storage Your inputs are very much appreciated.Thank you.

HiDuring accessing Commvault Partner university site we getting following error while we are login on partner site Regards   

I upgraded from 11.30.80 to 11.32.35 and lost access to the Command Center.  After the upgrade, Chrome started reporting “Your connection is not private” and “the website sent back unusual and incorrect credentials”.  Even though my certificate was still valid, I had my network guy generate a new commandcenter.pfx file using the same password as the old file.  I copied the file to D:\program files\commvault\ContentStore\Apache\conf on my web server then stopped and started Tomcat.  Now when I attempt to go to Command Center now, I get: 404 Not Found.I *suspect* this is more of an upgrade issue than it is a certificate issue.  Does anyone have any suggestion on what to check?  I found this post which had the same problem but what worked for them doesn’t seem to help me.  If CommVault staff see this, I have ticket 240112-474 opened but don’t seem to be getting any response.Ken

Hi All,is there some possibility to perform the action of “pick data for verification” for a job of a Storage Policy with a command line? Maybe I have to do it on a lot of jobs and I’m looking for a script.Any help is appreciatedThanks

Using continues replication for a number of VM”s. Some TB’s large. Question is this.When a failover is done. Does it take up double the space? Like is a whole additional VM created and the ‘replicated’ VM still existing in VMWare? Example: Live Syncing 1TB VM.-Failover-Do know hove 2TB of space used on the datastore?

Hello, I need to take intellisnap snapshot backup of oracle/sap oracle database once a day with no backup copy.If i just schedule default subclient (selective online) and not schedule archive subclient, will there be any issues during recovery? Thanks 

Hi all newbie here. just a quick question please,  While trying to restore a Azure vm in Metallic to Azure out of place, I get an error failed to create the container for Virtual disks under the storage account.  Should i speak with our Cloud people about this first before troubling Commvault. as i may not be choosing the correct storage account.   Regards  Tony 

i have used an account which was part of master group for all commvault configuration . later i have customized the permission of this user to minimum. does this affect any configuration which i was perfromed before 

Hi! I am working on VM onboarding PS automation for CV, and I can not find the way how to trigger backup for 1 specific VM (which is final step for onboarding process in our company)The only solution I found is: Backup-CVVirtualMachine, but unfortunately it returns me 404 error.Other ways allow to run backup for Backup Sets only which is not ok for me 😐Is there any other way I missing?Thank you

Hi all!I’ve been trying to solve some issue, but I’m out of ideas already. I’m preparing new Commvault solution for OLVM (Oracle Linux Virtualization, based on oVirt). One of the VMs (let’s name it VM_RDM) has physical RDM disks attached, which are being backed up externally, outside of CV. I need to exclude them from CV backup, but sadly I didn’t find any solution for OLVM.My VM_RDM is backing up properly, but I’m getting status “Backed up with 1/more errors” with description “physical RDM disks are not supported”. I know it doesn’t impact my backups, but is there any way to get rid of this communicate? I can’t use filesystem backup due to requirements. I tried disk filters in “content” page, setting up different plans, subclients etc, but it just doesn’t work. I tried additional setting “IgnoreUnsupportedDisks” (https://documentation.commvault.com/additionalsetting/details?name=%22IgnoreUnsupportedDisks%22&id=1318), but it didn’t change anything as well.  I found this topic which

Hi,I have found how to change the root password on each hyperscale X node.My question is : if the root password is changed, is there an impact for the backup ?Can i change it without impact ?

Hello,We have an hyperscale environment with 3 nodes that works with SFP 10G - we upgraded our network infrastructure Can we just bring the Hyperscale node offline (https://documentation.commvault.com/11.24/expert/stopping_and_starting_hyperscale_x_reference_architecture_node.html) replace all SFPs (from the 10G to the 25G SFPs)and it would work? or there is some scripts  that need to be run after we replace the SFPs?Best regards,

Hi team,We wonder if there are any benefits with run incremental backup before synthetic full [VMware] ?

i have a DR site with a vmware vsphere cluster. I use commvault replication to this DR site. I would like to monitor how much date is transferred after compression and dedupe.Where could i found this information ? I have a LAN to LAN 10Mb/s link and i want to understand what is transferred over the WAN.Regards

Hello, What is best practices Software Compression setting to reduces storage space? Automaticly its on SP but when are you suing compressie on Client and Media Agent? Or maybe turn compression off?

What’s the best way to find all PSTs from all my laptops and AWS Workspaces? I’d try File Analytics to search for .PST from our PCs but unsuccessful due to 500+ objects. The WebConsole was frozen. Had to kill the task. TIA 

Hello All, I working with API connection. I would like to receive where is located VM backup JOB by API. I can get job ID for VM, but I can’t received which copy store that data from storage policy. Good question how I can get it? 

 We are trying to remove the instance with API , however we cannot find any endpoints on the swagger .Could you please guide us to deal with this. ThanksSatish

HelloI created clients tags.Then I have a dynamic group of clients in V2 indexing which group together these tagged clientsWhen I create a Schedule to backup the entire group, the backup does not start.Do you have an idea ?Thanks

Anyone knows where are the links for the Commvault certification sample exams are?  Commvault education has move their site and it appears the sample exams for all the Commvault certifications are nowhere to be found

Hi,Just a quick question on the Bonded Topology for HyperScale X Reference Architecture.I can see from the BOL that the Storage Pool IP Address should be resolvable to the CommServe server !! Is this a new setting ? I have seen HSX config’s where the storage pool ip address is on a 192.168 range and the CommServe on a 10.10 range with no second nic for a 192.168 range. Thanks  

Hello,Could you say please, if I have Cloud storage in Azure, it is accessed by local MA with local DDB.Are there any optimization's during direct restore from cloud? I mean, if you have 10 TB application , that consumes 3 TB of cloud storage due to deduplication optimization's, how big amount of data will be read during restore?Thanks!

I have several jobs that have this message.    Killed by System. Reason:[].<br>Source: cs0003, Process: JobManager Insufficient disk space. Available mount paths are not enabled for write or have met reserved space limit. Enable/add more mount paths or add more disk space to existing mount paths.<br>Source: cs0003, Process: MediaManager