Commvault Cloud Topics

Just curious.  What is the policy where you work when it comes to applying hotfixes? Do you treat hotfixes differently than release version upgrades?I’m asking because my predecessors would apply hotfixes (if they addressed a specific issue) without really telling anyone other than maybe an immediate supervisor and an email to the engineering team (and maybe the NOC I’m not sure on that one).  They'd take a DR backup, SNAP the Commserver VM and let it fly and roll it back if there was a problem.I’m more of a formal process kinda guy.  I assume most of you will tell me, “what’s the problem?  Just follow a formal process.”, but I there will be people in my organization that will push back because of the successes of the past.  I lack the real experiences that come with issues related to applying hotfixes (if any).  Anyone have any experiences they can share?How do you folks treat hotfixes?  

Is there anyone configured the Splunk backup using commvault. i need step by step configuration guidance  required or any document which will me for configuration. on CommVault document is not fully helpful for configuration.   i am at 11.28 version. 

below is the current infra, i need to use comvault to take db and archive logs , make sure logs are shipped and applied in oci instance is it possible +-----------------------------+               +------------------------------+| On-Prem RAC Cluster         |               | OCI Data Guard Standby DB    || (ASM Storage)               |   Redo Logs   | (Managed DBaaS, ASM)         ||                             |  <=========>  |                              || Node1 (Oracle Agent)        |               | (OCI Service Managed Apply)  || Node2 (Oracle Agent)        |               +------------------------------+| Virtual Client (SCAN/VIP)   |+-----------------------------+ 

Hi, We have some Commvault supplied ova’s that are deployed in our environment running Oracle Linux. Recently there has been a CVE for VMware Tools and we were looking at ways to update that on these boxes. They don’t seem to be locked down like an appliance. Has anyone else had experience in updating VMware Tools on these?Thanks

Hello, I am attempting to perform an in-place upgrade of my CommServe in a dark site environment, which includes upgrading the SQL.I am facing a critical problem, and standard procedures have failed. Problem 1: Pre-Upgrade Validation Failure When I run the Setup.exe from my downloaded installation package, the Pre-Upgrade Validation check fails with this error:Automatic upgrade of the existing SQL Server instance is allowed but SQL Standard media is not available in the source media.Context: I downloaded the full installation package from the Commvault Cloud Services portal onto an internet-facing machine. I ensured to include all Third-Party Software (Microsoft SQL Server Standard). I have manually verified that the SQL media is physically present in my source package (in the ...\ThirdParty\MSSQL\SQL_Standard_Edition directory). My CommServe is a "dark site" and has no internet connectivity.  Problem 2: Software Cache Corruption (The Root Cause) I suspect the validation is faili

Why suddenly the files and folders inside the installation directory of my onprem backup gateway server lost. Even when reboot it nothings bring backup. Does it is a known issue that something needs to be done to become persistent when deploying the OVA?  

Dears,,I have tow large VMs > 14 TB . it will take many days to full or incremental backup . what are the best configuration to implement this VMs .I have ocean protect Huawei storage.  I don't create VSA for this Vcenter .

Hello Commvault Community, I’m working on reporting the total backup storage footprint of a single VM protected in a (deduplicated) HyperScale X environment.Using the Chargeback Details report, I noticed two relevant columns:https://documentation.commvault.com/2024e/software/data_views_for_chargeback_details.html Media Size: The amount of data that was saved on storage media during the specified time period, including aged and pruned data. For storage policy copies that have deduplication enabled, the media size for each job is calculated based on the average deduplication ratio of the copy. Where media size = application size * average deduplication ratio per copy. The average deduplication ratio of a destination copy is calculated by (total size on disk)/(total protected app size) for the destination copy. Total Media Size: The amount of all active data that is saved on storage media, including all storage policy copies on all media types, and excluding aged data. For storage polic

HI All, i just want to know the process how the data get reconstructed on the disk after the replacement. I’m aware the hyperscale uses Erasure coding in back end but not sure if we have any document defining the process.  

I am getting this error when running a backup job for 2 servers. Has anyone seen this before?  I have other servers that can backup successfully on this Commserver.Thanks!

Hi,Is it possible to use linux for intellisnap proxy server or should I use only windows for the proxy as the document said? Thanks 

Hello, I’m curious how others are doing this or what Commvault recommends. For our Windows-based mediaagents, the DDB disk is actually 4 SSDs that are plugged into a Dell PERC, specifically an H740P, and then in the Dell hardware management, iDRAC, we configured a single SCSI disk out of RAID-5 for those SSDs, and so that’s what Windows actually sees. I was just wondering if Commvault has any opinions on setting up the DDB on SSDs when going through a hardware-level obfuscation like this, or whether Commvault believes that there would be a noticeable change or improvement to performance, if the SSDs were natively exposed to the OS and managed that way.

Hello Commvault community! We are designing a backup strategy for two AVS sites, using SRM for replication and failover. We see two main approaches: Maintaining separate backup schedules and MediaAgents at each site, then manually switching backup jobs after failover and failback. This ensures data integrity and backup continuity but requires manual or scripted coordination. Replicating MediaAgents and backup disks via SRM to the DR site. This seems straightforward but Im not sure if it’s recommended by Commvault (because SRM’s block-level replication can cause metadata and deduplication mismatches, leading to backup failures or full resyncs).   Since SRM is already deployed and Commvault Auto Recovery is not an option, we lean toward the second approach. Are there other recommended practices or automation strategies for managing backup continuity in AVS + SRM environments?Thanks!Nikos

I have never upgraded the Commvault version before, so I have a few questions I'd like to inquire about. 1.Can I upgrade from SP16 to SP32 directly, or should I stop at an intermediate version first?2.Should I upgrade the HPK of SP16 to the latest version before upgrading the SP itself?3.My Commvault SQL version is 2012. Should I upgrade SQL first, or will the SQL upgrade automatically when I upgrade the Commvault SP to a version that requires a newer SQL version?  

I have a media agent (MA1)  that hosts DDB Cloud Disk 1 and DDB On Prem Disk 2. DDB Cloud is running out of space and I need to run DDB Compaction to reduce space until we get more disks.The outlined process says to1- Stop all jobs2 - Ensure that there is no SIDB2 process running on the MediaAgent.I can stop all jobs that are using the DDB Cloud Disk 1, no issues here, however the media agent will continue to run jobs for our On-Prem copies using DDB On Orem Disk 2 which will continue to have the SIDB2 running. Can I run the DDB Compaction for the Cloud DDB  even though the SIDB2 is running for the On Prem jobs?What would be the recommend action here?On a different note/request, is there a way Commvault Team could take a look at streamlining the compaction process via workflow or a different method that would not require a command line for each DDB store (file/DB/VM etc)? Thank you 

Hello,I am attempting to perform an in-place upgrade of my CommServe in a dark site environment, which includes upgrading the SQL.I am facing a critical loop, and standard procedures have failed. Problem 1: Pre-Upgrade Validation Failure When I run the Setup.exe from my downloaded installation package, the Pre-Upgrade Validation check fails with this error:Automatic upgrade of the existing SQL Server instance is allowed but SQL Standard media is not available in the source media.Context: I downloaded the full installation package from the Commvault Cloud Services portal onto an internet-facing machine. I ensured to include all Third-Party Software (Microsoft SQL Server Standard). I have manually verified that the SQL media is physically present in my source package (in the ...\ThirdParty\MSSQL\SQL_Standard_Edition directory). My CommServe is a "dark site" and has no internet connectivity.  Problem 2: Software Cache Corruption (The Root Cause) I suspect the validation is failing b

Has anyone use MECM (Microsoft Endpoint Configuration Manager) software to deploy or update Commvault software in the entire Commcell environment?  We are currently exploring this option but I dont have much information to begin exploring. Also I am not sure if this will even work or is supported by Commvault Any advice or suggestion is highly appreciated

Hi, We have setup a third isolated copy on CloudLib. On this copy we are also enabling Commvault Compliance Lock. We have Oracle backups running to our Primary Copies where we have RMAN managing the retention. As per the documented instructions we have the CV retention set to Infinite on out Oracle Plan and this works perfect as we can see the jobs aging off per the RMAN retention. The question/concern is what happens on the third copy if we set the retention to Infinite and enable Compliance Lock? We cannot risk locking the data with Infinit retention for obvious reasons.Anyone out there that have experience of this? What is best practice? Regards,Patrik 

Hi friends,Good day! I got this situation, there was data disk failure happened and new disk was not yet replaced, but a DDB verification job got started, it reported completed with error due to some block can’t be read, but the DDB verification succeeded the nex day, but the new disk not yet replaced too. why this happened? does this mean that hyperscale reconstruct the data blocks on the failed disk to the rest good disks? I thought it should like RAID when a data block on a missed drive can be calculated out by EC code  from the rest drives when access request come?Thanks,Leo

Hello Commvault Community, Is there any information yet on how reconfiguration will be required for EWS running within O365 protection?Support for EWS for O365 ends on October 1, 2026. There's no information in the Commvault documentation yet – there's still some time left, but we're receiving inquiries from Administrators. Retirement of Exchange Web Services in Exchange Onlinehttps://techcommunity.microsoft.com/blog/exchange/retirement-of-exchange-web-services-in-exchange-online/3924440 Thanks in advance!  Regards,Kamil

Hi, I am looking for a complete list of resources from each cloud provider that Commvault is able to protect.  It’s currently being used for my VMs, some DBs and AD.  

Hi Community,currently, CommVault Cloud SaaS supports several Dynamics 365 CRM applications such as Sales, Customer Service, Marketing and Field Service.However, “Project Operations” is not yet included in the list of supported modules.Is support for CRM Applications “Project Operations” planned for a future CommVault SaaS release? Thanks and best regards,Andreas

Hi All, we are actually fighting with the deployment of the Nutanix Image with 11.36 . We downloaded the image from here: Nutanix Image with 11.36 During the deployment we tried to add custom script like frel: CS_IP_OR_FQDN=commserve_host CS_SHORT_NAME=commserve_client_name CS_USERNAME=user_name  CS_PASSWORD=password FREL_CLIENTNAME=client_name ROOT_PASSWORD=Password Without success.  If we rolloutthe image without script we cant login.  In the docu i dont find anything for accessnode only stuff for frel. Do you have an idear for nutanix ahv access node deployment ?  

Hi,Please, could you help me with the following question:Currently our customer is using Commvault’s deduplication feature for every copy (primary, secondary).They want to start using hardware deduplication (from their backup storage appliance).Since secondary copies are written to a secondary site, we were wondering if it is possible to disable deduplication just for the primary copy (which would use HW dedup) and enable it only for the secondary one, in order to avoid high network usage between sites. Thanks in advance!

We have been requested to provide a list of backed up content for an Azure Data Lake Storage instance.  Being a new workload, the intent is to validate the defined content (which uses multiple wildcards) is protecting the required data. Unfortunately, given the number of items associated with the ADLS workload, we don't seem to be able to extract a complete list of backed up items:CommCell Console seemingly can't handle the number of objects (1.2 million) CommCell Console reports are limited to 10000 objects. Command Center doesn't seem to give me an option to export the list. ListFilesForJob.exe doesn't seem to work at all. Are there any other simple options in 11.40.x?