Virtualization and Containers

Hi,When trying to restore off tapes from 4 years ago, we get the following message: MSGID 0x0e0000f4 failed to initalize browse request, check browse.log on commserve for more details. The last 2 restores we can do a browse and restore from however nothing from the time period of 4 years ago. The last 2 weekly’s (30th of August and 3rd of August) we can browse it no problem. However the 16th of August errors the same as the error from 4 years ago. It seems to be random.Lost and not sure what to do.RegardsMuhammed

Can we configure 1 VCenter in 2 different commServe?The Subclients that backup are different in 2 Commserve’s and proxy’sWill the Backups run smooth?Do we anticipate any ambiguity? 

Hello Team,In our environment we have are planning to a VM migration from one Vcenter to the other one.I am thinking of commvault instead of Veeam application to perform migration.In commvault thinking of using VM replication option to migrate VM from source to destination vcenter with periodic replication. Once replication is completed I can stop and continue services using destination vcenter.Please suggest, if its good to go or do we have any other option to perform the migration.

An endpoint to backup an entire esxi datastore?

i would like to know how the restore works , considering i have a full backup on weekend like Saturday and then daily incremental . now i want restore from last Wednesday , how the restoration works ?system go for the last full backup and then check the incrementals then convert it as a full backup and restore , or do we need to do it manually ??

Hi Team,We have facing an issue with our Infra, While we try to restore a full database from Exchange DAG backup to another database with same node but we getting below error and job will failed continously "Exchange VSS writer reported an error, Please check the windows event log and log files for more information Process: Cv Exchange Database restore"Kindly request you to share any solution for above mentioned issue

Good day!We have a requirement to route VMware backup over the dedicated VMkernel network on ESXI hosts. Unfortunately, the CommVault solution does not have a proper method to route VMware backup traffic over 902 (NFC) to HyperscaleX. If I’m correct the “Dedicated Interface Paring (DIP)” will not work for the VMware backup type.  Please let me know if there are some improvements made in the latest Version to manage VMware backup traffic using DIP.Below are the environment details, IP, and names being just dummy, curious to know if it will work if I use a host file entry to route traffic over a dedicated VMkernel network. Commserve:   IP and NameMGMT -→ 192.168.10.10 cs01.test.comBackup -→ 10.0.8.10HyperScaleX:  Network label, IP and Name. Three node HSX cluster. Bond1 has sub interfaces. Bond1.1 → CS-Reg → 192.168.10.11 HSX01.test.com, 192.168.10.12 HSX02.test.com, 192.168.10.12 HSX03.test.com → This has DNS entry.Bond1.2 → Data Protection 10.0.8.11, 10.0.8.12, 10.0.8.13Bond2 → Storage

Hello, we are planning to install an Azure Stack HCI 23H2 cluster.Does CV (11.28) currently support this version for Backup and Recovery? I find in the documentation “Azure Stack HCI version 20H2 and more recent versions”.Thanks in advance.Jörg

Good Day Community,Few questions regarding Auto Recovery from VMware to Azure AVS (Azure VMware Solution).First, I do not see clearly on the documentation site if Auto-Recovery supports VMware to AVS replication (although it is VMware to Vmware (theoretically), I’d still like to validate if it is supported.Second, will the restore still be an incremental restore.Thisrd, if the customer decides to go with Auto-Recovery between VMware and standard Azure VMs instead of AVS, will the restore still be an incremental restore.Many thanks in advance for your kind help.

Good morning,I have the following question to ask:In a Disaster Recovery scenario, how do I restore a VM from the Metallic backup to a new infrastructure? In my case in a new Nutanix cluster?Thank youCarmine

Hi,I can no longer restore a backup.Now clicking on Restore opens a blank page.The backup is hosted on server m.102I need your help.ThanksCarmine   

Our container SME noticed that there was a new namespace created a couple days ago which appears “empty” for the most part. This page talks about it but sort of implies it requires manual steps to set up.Nobody did anything to push this into the cluster, and, we protect 4 distinct clusters with cvlt yet only one of them has this new namespace in it. All 4 are backing up just fine (all namespaces that is) so, what is it and why does it appear to be randomly created in our clusters?thanks!

Hello fellow Commvaulters, I hope someone can help.  We had a case recently raised with Commvault where data that was used to restore data from Azure Archive to Hot Storage.  However even though the job completed months ago, it was noticed by our Cloud Services Team that the data was still sitting in Hot Tier Storage which was costing a premium.  Commvault’s documentation states the below.  However does anyone know how we can empty this container manually? Second question is the below states “Move back data from Hot to Archive”.  Where is this option on the workflow?  I couldn’t see it?  There is an option to tick “Auto-archive recalled files on restore job completion”.  This was ticked for our recall, but still the data remained in Hot Tier.  Surely this should not be the case? ThanksTonyQ If you execute the workflow with backup job as input, execute the workflow again and select the Move back data from Hot to Archive option when prompted. Data will be deleted from the cvshadowcopy-do

We are performing the Physical server restoration to Azure with Virtualize me option form the command center, During the restore we are getting below error. Same server if we perform the Virtualize me restoration from the GUI console, the restoration will be success but the server is not booting in the Azure. also we noticed during the restore the multiple VHD are getting created. But the server is having only 2 drive C and F. Also i want to highlight here, In the general tab we are not bale to list/select the Hypervisor client, there is bug in it. Could you please help me to fix the issue.   

Azure VM backups are getting failed with below error code, Snapshot getting created post that getting unable to read the disk.  log file attached   Error Code: [91:113]Description: Unable to read the disk [https://md-r5sp1nzjkxs1.z7.blob.storage.azure.net/bt5kpx01pl3t/abcd?snapshot=2024-02-17T21%3A00%3A28.0030944Z&sv=2018-11-09&sr=bs&si=ff7b9b039aa14394bae0b2f59321f9726cd73ffc95b549589fcd0d1abefee679&sig=KfuFaTyCvVXB15PVlcnZSxU0CGie22f8oPVAcqfEoQQ%3D] for virtual machine [SAPTESTVMW01] on Host [rg-dev-sapapp-001]. [One or more errors occurred while processing the request. (ERROR_ERRORS_ENCOUNTERED.774), Failed to get allocated extents (W32.774)]Source: weazmgtabkp04, Process: vsbkp 

Hello All,  Please we need to deploy VSA proxy for Nutanix AHX  clusters and we want to know the best specs for the VSA VM. also can Oracle 9 or Redhat 9 be used. which is more compatible.

Hello, please if you can help me I have this error when I take a full backup of a VM this Job advances 36% then I get this error. Maybe someone had experience with that error.“ Error code: [91:113] Description: Unable to read the disk [[PSLP40TBSSD03] clon bit01/clon bdnit01_3.vmdk] for virtual machine [S-NAL-BDNIT-01] on Host “

Hi There,We are running on Commvault 11.32.54, Is Commvault supporting Proxmox hypervisor for backup solution.Is there any other solutions available for Proxmox hypervisor VM’s to cover under Commvault. Please provide me the doc, if available. 

Hi We have two site main DC and DR site and I want to replicate a vm from DC to DR and we have mediaagent on both site.What is happening right now is when replication happen it first take backup (dedupe) and then restore from backup to DR site and while restoring process full vm original size and it is choking the bandwidthThen i take the call with support and he suggested to check the “replicate using secondary copy option” and choose DR mediaagent as storage in secondary copyNow when replication trigger it first take backup in main DC site then aux copy trigger from DC  to DR site then replication happen but it still restoring the vm from main DC not DR. Can anyone help here?

Hi team, I am trying to install MSSQL agent on server which is running Windows 2008 R2. I am getting below error while installing. Please help me on this.install.log   

Hello,do anyone know when Commvault will support OLVM 4.5?regards Juergen

we are doing Planned Failover for Vmware to Hyperv Migration Activity  ,but we are seeing missed VMs in target host ,after failover job completed,multiple missing VMs  are created  for single VM  how to overcome this issue , is there any way we can prevent this missing VMs .

Hi All, Commvault indicated in the documentation how to virtualize the  physical machinehttps://documentation.commvault.com/2023e/expert/create_virtual_machine.htmlbut I still have a question about the behavior after virtualizationThe Windows client is planned to be virtualized and has iSCSI disks connected.After virtualization and connecting these disks to the virtualized machine, will it be necessary to perform a full backup?The same disks with the same data will be on the virtualized machine.Will Commvault maintain continuity of backups in such a case?  

Hello Team. Customer has moved on-prem vmware ms windows vm’s to azure as azure vm instances. They say they have the vm’s in 4 separate subscriptions and provided 4 subscription ID’s. The CV Azure Client has only 1ea. field for a subscription ID. To protect these vm’s, will 4ea. CV Azure Clients need to be created ?

Hi Does anyone has experience how to backup Vcloud Director named disks?  https://docs.vmware.com/en/VMware-Cloud-Director/10.4/VMware-Cloud-Director-Tenant-Portal-Guide/GUID-8F8BFCD3-071A-4E45-BAC0-A9B78F2C19CE.html TksFT